SFYellow

Nobody knows how to deal with this problem ? I thought it would be quick and easy fix ...

I ran 3.01 version and this message comes up sporadically any time during the system being in MAP mode. So far I had this error message came up four times. The most troubling is that the system responds very, very sloooooow. It takes up to 10 and sometimes up to 15 seconds and more for the buttons to recognize that they were pushed.

Before that, did you make any changes? Check that there's still some free space on the Flash drive. Nope, that is the thing, didn't do any changes. How much of a space does FlashDrive has to have?

No one knows what to do with this issue?

Hey guys, in the last few weeks I noticed that my F90BT became really slow. I didn't do any changes to it for a while now. However, it takes unit forever to recognize that button was pushed or switch from map screen to main or to AV. I noticed it started giving me "out of memory" error message when it is in Map/Navigation screen. Basically message reads this: "Out of Memory Requested 1752706694 Cache 2298694" Anybody knows what this means and how I can get my unit back to the normal operations when I don't have to wait 5 minutes for "Ok" button to recognize that it was actually pushed

Just use the file that is provided above unzip it and put it on your Avic system via test mode. It will take care of the TTS.

Ooo I see. I had completely wrong instructions on how to install it. Thank you!!!

Thank you! Do I need to unzip these files before putting them on SD card?

I finally figured out how to use grabit service, but now all of these files are not hosted . My grabit keep telling me that it is unable to connect to these 83_... files.

Hey guys anybody installed Samantha TTS on the 3.1? Is there a difference in TTS files and/or install between 3.1 and lets say 2.0? Where can I find Samantha TTS files?

It is stable for me.

Thanks! Got em in 5 minutes! I love usenet.... I downloaded this file, but what do I do with it? When I unzip it, it shows one file total "83_Cont_USA_2009.06_TA.nzb" and this file is only 307,188. The total size files that I download from the "passworded" link is 228,995,205. What am I missing? I really want to upgrade my maps, but keep missing something out in the file download process. Please help. Thank you.

I've dowloaded all the files, used password to unzip them. Once I unzip them I can see two folders - "buildings" and "dem". I have no problem copying or opening folder buildings, however, when I try to copy folder "dem" which contains file "NorthAmerica_low_2008_03_25.dem*" it starts copying (in reality as I understand it fully unzips it now) and than it stops and keeps asking me for the password over and over again. What is wrong with it? I thought I only need to enter password once.

I am trying to upgrade my unit with the new maps following this post: viewtopic.php?f=34&t=29258 So I downloaded all files once I try to unzip I input the necessary password, and it seems to take it, but when the actual unzip happens (when I copy or open this folder) it keeps giving me the same error over and over again: "Decryption of the file 83_Cont_USA_2009.06_TA...\NorthAmerica_low_2008_03_25.dem failed." Please help.

The sixth map link from the dowload site is not available . Anyone have any idea what is going on with it?

I got this working just fine! Thank you Carver!!! One question, is it hard to make an update to your code to skip warning screen when you want to switch to AV1 or AV2?

Want to say THANK YOU all for your support and SPECIAL THANKS TO " 1loudls" for being patient with me and help with my "stupid" questions. After tinkering with it for a good week, I got both rear and front camera's hooked up and working! THANK YOU!!!!!

Is the link to the file you are posting gathers all of the 16 files that are in step 1: Download the 16 rar files located on the top of this website (yes... you need to dl all 16) http://www.filecrop.com/search.php?w=83 ... =1048576&c

Carver thank you for the amount of time you invested into this mod. Like everyone else in this forum I am looking to get my unit to the best possible tune and your mode is one of the items that is great to have to bring Avic unit to its best. I currently have 3.01 and IDT mode plus green theme. Should I have any issues running your files to eliminate navi warnings? Just to make sure I understand the sequence of install: 1. Downloaded latests thee files from the first page: CoomonLib.dll; MainMenu.exe; SystemSetting.exe. 2. Copy all three files from SD card (while I am in test mode)

You were right, I feel so stupid, the options in the settings for both Rear Camera and AV1/2 were turned off. I just changed configurations and YEAHY! Now I just need to figure out how to find best way to run wires from the back of the car for the reverse drive and I will probably end up using wireless transmitter for the front camera so I don't have to poke wires through the firewall. One more question, for the front camera I need to look for a regular not mirrored CCD camera, is there any camera's that you know of that transmitts good image but non mirrored?

Thank you I will check those settings tonight. Maybe that was it.

The reason the options are grayed out is because you either didn't do the bypass or you didn't pull the parking break. Hm, I will double check but I did have a bypass hardware installed in the shop when I installed the unit and I was also able to watch video and DVD while driving, which is also proves that bypass working. Also, my parking brake was on, what else could there be? Just in case I will check bypass today by watching DVD when parking brake is not on.

Guys, I had a set back yesterday, I decided to check if the camera works at all by simply tapping into the red wire at the HU and Black wire at the HU. I tried Video cable to be plugged in first in "rear view camera" and than in the "video input" and in both cases I got no result at all? Once I started car the stereo came up as usual, but on AV inputs page "AV1", "AV2" and "Rear Camera" all greyd out like nothing connected to it. I am deeply confused , what did I do wrong? Why no connectioni with the HU?

Wow, that sounds tooooooo complex for me . I think I will stick with the simple connect to the AV1.

Thank you!!!