zchrisz

well heres what i found, i was under the impression it was my amp's rca cables to the head unit cause i would wiggle them and it would go away, i replaced it with the same issue, now my right channel still goes out, if i switch from the ipod to another source the channel works fine, it's definately a connection issue with the ipod rca harness, i disconnected the right channel and lost the sound, so there must be a bad connection on this cable or the rca's to the head unit, next time this happens i'll have to see if the rear right channel is out also.

it's the front RCA set from the head unit, i thought originally my rca cables from the head unit rca's to the amp had a short, so i changed the cable out, and low and behold i have the same issue, i've only noticed this on the front RCA's though, mostly the right channel, i'm going to pull the head unit today and investigate further...

it's a problem between the harness from the headunit to the rca connectors, it's the factory harness itself that has a bad connection.

All, i've seen this subject pop up multiple times, i mostly use an ipod on my f90bt, ever since the install my right speaker started not to work sometimes, mostly in the winter it was worse, if i reach behind the dash and jiggle the wires, the speaker will come on, i've narrowed this down to the factory pioneer harness, i have not had a chance to pull the deck and investigate any further, has anyone else farted with this issue?

yeah, i had a copy of the data.zip file in the root of my sd card, when i unzipped your file directly to the sd card i did not realize it made a sub directory

doh! i figured it out, thanks guys

lets make this easy... where does the data.zip file go? can anyone else confirm this works, i put the data.zip file in the correct location.

abb are you running a certain theme, i downloaded the files again, it shows the change at the bottom center from pioneer to media center, still the navigation map has a black bar where the clock is shown and the button backgrounds are not red.

everything is red, just like the pictures you posted above, but in the navigation map screen the top bar with the clock is black, and not red.

i'm sure i put the data.zip file in correctly, i do have the theme set to pioneer red. i'll check when i get home

Hmmm, can you post a pic? i dont have a pic, but i think i can better explain it, in the navigation map display there is a bar that runs along the top with the clock, in idt mod it's black, your image shows it red, mine is not red after putting in your data.zip file, it's still black.

hey abb, i must be retarded, i installed your data.zip and my navigation map screen the bar on top is still not red.

i just installed this theme, everything is red aside from the map screen it's the normal IDT one, i'm running the idt skin 2 3.0, i did not get your data.zip file as the link does not work, is this why?

found it, i edited the file with 7zip instead of winzip and it worked.

i just recieved my first call through my avic-f90bt with my samsung m520 and everything worked great, after that phone call, i could not dial anything from the avic, i had to shut the phone off and back on, is there a work around or known issue on this?