Stanislavovich

Go to Map (a button under the compass), find your pin (baloon) and set curson on it by clicking, then push "cursor" button on the right side (red circle) and you will see "Remove pins" button. That is all.

You couldn't increase or decrease it because the speed is written down not by interval but depends on speed changes. So the only way how to increase interval is to drive with the same speed.

Exit button is not new one or something else- it is only for me to testing, please do not swith on test mode in regional settings, it MUST be OFF forever!

The box can be removed from the screen only in "Full screen" mode (settings-visual). But only completely with all info

spud keeps speedcam's code.

You can not add address to favorite, no such function in iGO

all ezrider releases i know even last 8.3 do not understand advanced cameras, they treated them as fixed camera. there is no harm, only wrong type on display... SpeedcamUpdates.spud try attached (for ezrider 8.0) SU 1.08.xls

You could do it through a SPUD or a normal speedcam.txt. Not sure if iGO will read multiple SPUD files. It certainly does with TXT files. You can add advanced cameras by yourself through cursor menu (Add Speedcam). But current release of ezreader does not work correctly with txt files to upload advanced speedcams, so the only way is to manage them in spud file. It could be only unique spud - SpeedcamUpdates.spud.

in your script sc_cs_sound is called only if vSCAudibleAlert=3 , look carefully! that is why else_runif further do nothing

if you see that button that means you have switched on test mode in regional settings. please switch it off, it is only for my testing, you do not need that button at all.

yet 2.0

"Full" and "On" are the standard behavior of iGo speedcam warning system. "On" warns only if you are overspeed, "Full" - forever. The way how to warn, sound etc are managed by exe and sys.txt. "Custom" is fully mod-designed warning completely substituting standard one. In fact "custom" switch off standard speedcam warning and the mod produces own logic and mod-determined sounds.

script sc_NavigateMapClick ... map.ONMAPCLICK sc_NaviMenuAlphaRestore ...

After any event write something like 500 run sc_fade_my_icon 500 means delay after the event you chose fade effect could be gotten by .alpha parameters of your button

You are right, it must work. check please, may be you did not update ui file or place it in a wrong place.

- turn "off" the Off-Route Recalculation - I am developing - a button on the map screen for route recalc - I am developing - Tracking Up in 2D - sorry... if you load saved route from destination menu then you will be in navigation mode, so recalculation will run. to avoide that you have 2 possibilities - turn off gps (through navi settings) - load saved route through map mode (where are the buttons route, cursor, find, fit etc). By that way you will be into the map screen (not navigation) and recalculation will be switched off, so you can simulate, investigate the route etc till you

could you check in gps settings the gps icon what is the color in tunnel?

1. the dots in the top right corner are gps level. 2. new icon with a film box picture runs track recoding, the red one is to stop recording. while there is red one it is recording, so if you do need it you must stop it. 3. you must switch off testmode in regional settings and never set it, always OFF, it is for me only.

in what way do you think it will be possible to add that button? I do not like to put it on the screen, what if I put it in the bottom line to the avoid screen: during the navigation the button "avoid" is active, when you push it you can choose the blocked distance, delete route and ... switch on/off the sound. if it is suitable let me know, that i can do. Yuri

I am investigating the issue. for the moment it is not clear for me when and why those button is hidded. if I do not find the reason I will insert in the mod more or less the same code like yours.

I was wrong, of course EW. ok, I'll investigate deeply

What screen do you mean exactly: navigation (with left box) or map for planning (with right buttons)? I will think. added: I have an idea. Sometimes it was really I would like also to cancel the route and it is not so easy: map-route-delete-ok-nav... a lot of movements. so my idea is to add a button to detour screen, if i need to cancel the route i have to push: maneuver-cancel, that is all. I'll do that. color... like taste never find 2 like the same I could suggest painting your and put it in ui_pioneer\800_480\cockpitframe.bmp beside data.zip and you will forever have your own.

I do not understand why you do not see it and could not test. Please could you replace in my data.zip these 2 files and then check what it shows in Regional Settings - Device Region, must be "EU". if so I will investigate deeply. dev.zip

TMS button must be in the Destination screen. it is unhided if vBeta equal 1 or 2 (EW or AU), so it is strange that you do not see it. Please check that you do not switch on TestMode in the Regional Settings. it must be OFF. To run any application you must copy it in any next folder \Storage Card\Programs\ \Usb Disk\Programs\ \My Flash Disk\Programs\ and rename it into "application.exe" it will run

I have checked again. My approach was to keep the same screen when you switch to plan screen from cockpit one, no car's position neither cursor's in the center of the screen. You can see that easy if you first switch into 2d in cockpit and then push "plan" button. the map position is not changed. if you want to center cursor then you can push the "fit" button, if car - long click on the "fit" button. Of course to switch from 3d seems a little bit mess considering map position but really you simply go into 2d.