NM06lariat

Thanks for the inquiries everyone. It's now gone...... Thanks again! Phillip

I've got a Sirius receiver for sale. It's less than a year old and is complete w/ antenna, power cable, IP bus cable and paperwork. It works perfect or your money back. I'll take $20 shipped. Thanks, Phillip

If you're looking for a Sirius add on, I just removed mine and I'll sell it cheap. Let me know.

I just activated a new radio and had no trouble with the $77 a year code. It was a total of $82 and some change with tax.

Hello all. I'm thinking about switching to XM from Sirius. Does the XM give more info than the Sirius unit? I am very limited as to what info I get out of the Sirius. Could I possibly get a pic of what XM displays??? Thanks, Phillip

Forgot to mention that you can also have the remote hooked up as well. The only problem with hooking it up, it that the unit will stay powered up even when not in use, you have to turn it off and on using the remote. It will however go off after the vehicle is turned off.

I've checked everything. I've replaced the cable with one that works on another monitor. Pioneer says it's a video chip problem. I guess I'm going to have to send it in. It's under warranty, so I hope it's no big deal.

It's a video cable from Radio Shack. I tried another monitor with the same cable and it displays fine. I guess I've got a bad input or something on my D1. Any Ideas?

I just installed a P-90 DVD changer with my D1. I'm using the vieo input od the D1 for a monitor. The images on movies appear to have a ghost like shadow on them. The Nav screen etc is mormal, no shadows. I've tried different color settings etc. What is the problem? Can someone help? Thanks, PHillip

Just wanted to give evryone a update for future reference. After chatting with another member I got my XDV-P90 connected to my D1 and it works flawlessly. Below is how I hooked it up. P-90 was bypassed (grounded brake wire) P-90 to D1 using IP-BUS cable P-90 Front Video out to D1 Video in Using Composite RCA Video Cable P-90 Rear Video and Rear Audio out using Composte RCA Cables supplied with my W6100 Pioneer Flip Down Monitor This setup WILL allow you to watch Video on both screens at once WITHOUT hooking up a AV-BUS cable. The remote that came with the monitor will also

OK. I'm trying to hookup the Changer and I get 3 different answers from Pioneer Tech support. I need some advice/help. I want to control the changer through the head unit, and watch video on a flip down screen and if possible on the front screen as well. Do I set the changer to IP Bus mode and connect the IP Bus cable to the head unit as well as the RCA jacks or do I connect the RCA jacks to the monitor. Any advice will be greatly appreciated. Thanks, Phillip

OK everyone. Sorry for the late reply. I had to leave town for a bit. After talking with the tech @ crutchfiled we decided that the truck was wired for a sub, but there wasn't one installed. I have the head unit & sirius completly installed and it works and looks great. It appears that the mod/hack has worked flawlessly too. I will work on the changer tomorrow and have the monitor installed next week. Thanks for all your help. I'll add pics when finished.

OK. Now, What aboutthe other smaller harness that was on my factory radio? Please tell me it's not a subwoofer. If it is, what do I need to do?

Holy Snikeys! I just pulled my stereo to find two factory harnesses. What does that mean? Also, I searched for the VSS wire and found that it should be the gray/black wire in location 5, but it's not. location 5 is only a black and location 14 is gray / black. So which one is it? Thanks, Phillip

Thanks again. Yeah, after looking at it, it will have to be mounted up front, I've got all my wires soldered and I'm off to the races! Wish me luck