bobes75
-
Content Count
5 -
Joined
-
Last visited
About bobes75
-
Rank
-
Hey all, question about the AVIC x910bt. I'm thinking about adding a backup camera and have a potentialy obvious question. First, when you put the car in reverse, does the camera automatically turn on and display the image on the screen or do you have to press a button to turn on the camera/display the image on the screen. Second, and this is probably the obvious one, I would need to wait for the the unit to fully boot up before it would display the image, correct? In other words, I get in my truck and start it, the unit fires up and starts the booting process, the image wont display on th
-
it all depends on the car, some times both wires will be at the wire harness(or the module for the harness reads the signals through CAN, and then send a signal through wires) Do you know of any easy ways to find the wire in specific cars?
-
Its just a shame it seems to be the harder of the two wires to hook up. The backup signal wire looks a bit easier to hookup than the speed sensor wire. How does that saying go...
-
Hey guys, Sorry to jump on this thread but this seems to be the closest post related to a question I had and didn't want to start a new topic. I just got the x910bt and am going to install into a 2006 Ford Escape. Question about the wiring for the install. I've already got the wiring harness setup for the bypass and I'm going to be doing that, but based on what you're saying, you do NOT need to hookup the pink wire (car speed signal input) or the violet/white (reversgear signal input)? I'm going to ground the ebrake wire but wanted to 100% confirm that I do not need the pink or violet
-
Hey guys, Sorry to jump on this thread but this seems to be the closest post related to a question I had and didn't want to start a new topic. I just got the x910bt and am going to install into a 2006 Ford Escape. Question about the wiring for the install. I've already got the wiring harness setup for the bypass and I'm going to be doing that, but based on what you're saying, you do NOT need to hookup the pink wire (car speed signal input) or the violet/white (reversgear signal input)? I'm going to ground the ebrake wire but wanted to 100% confirm that I do not need the pink or violet