condiczek

Great work! I will see what we can do with this later when i get back home! We've got good progress Yes no problem, later this day. We are getting closer to working gps Thats very propably! Let see what garrettoomey will say

Ohh thats good news Thats why backup is so important .. Even if you had brick, now we know that you can easy get it back to work Try again to install hackmode, try again without replacing PRG1 with PRG0! Maybe stock genuine pioneer update doesnt need to replace PRG1, maybe only cracked update! Figure out what went wrong with your unit, and post your thoughts!

I will try to help when I get back home. Maybe you could try ShortFuse update crack? On Z110toZ120 it was tested with few users, strange that it caused problems for you. Try Tudor Z's method, and also Shortfuses dll! Br Condi

v1.0 ready! it will be 'base' version, i will release auto-updates/patches from now on PS. about gps port - tried to run GpsGate, PortSplitter - with no success.. Keep on pushing further!! ---edit: I've dumped full registry. Found interesting two DWords: HKEY_LOCAL_MACHINE\AplSetup\Launch.exe (1) HKEY_CURRENT_USER\Start\dummy (1) Its the first time i saw 'start\dummy' dword. Maybe it causes our windows to be such 'handicaped'? And about 'AplSetup\Launch.exe' - i think that maybe this could give us working/free gps port? I can change the values, but after reboot it

As far as I remember Navi.exe was running after Av.exe, with hackmode it doesnt run! Also I've replaced Navi.exe with iGO exe and also it doesnt find gps. Keep on searching for the solution guys Tomorrow I will have free day, I shall use the time for avic!

Replaced Navi.exe runs automatically, then after some seconds AV process comes to front, when you want to switch to nav it goes black I've got all time long new ideas to get gps to work, just keep on trying 1) I will make shortcut to auto-make-testmode-sd and enter , 2) tried already some other splitter-thing without success, ok, will try Glopos later 3) control panel is not working correctly, but for now i think its wince 5, 4) I will make version for USB later this weekend or maybe sd&usb, both in one 5) F30BT - my maaan i've got this unit Thanks for feedbac

v.0.2 up! PS. I can make version with shortcut on the desktop which will automatically 'make' pioneer testmode on SD which is inserted, restart unit and enter pioneer service mode, it would be simply 'ENTER SERVICEMODE'. Fast jump to service mode. Do you need something like this? PS2. I was looking through registry, and found gps is connected with some files in NAND2 or NDATA... i dont remember exactly, but it was GPS folder with some gpspara files etc. We've got to look at this! I tried to put iGO8.exe as Navi.exe - runs ok, NO GPS, fail; I tried to use some SirfTech.exe util, to

I think that you need special-named empty file to get into TestMode? There are some key files in TestMode 2.3 like: 63D21BEFE088433dBE3CF942347464C7, 164C549550B84211BA8C4B84AC5C0081, etc. You need the correct file to get access to TestMode. There is available firmware for F310BT, you can search for someone who maybe took off the key from fws? Another option is to modify firmware update with my prepared files, to get hackmode, but its risky without having access to standard pioneers testmode! br condi

Fault resolved! It wasnt car battery, it was problem with fuses! I'm in the game again! Today i've got some free time to test some solutions.. See you soon.

Thanks for posting results and I'm glad that it works 1. yes, there is alternative version with FileManCE instead of Total Commander, in first post 2. exactly, no iGO! 3. i will continue to make things better, but for know i've got some problems with car battery ;/ gotta go to warranty.. br condi

select all/copy, then navigate to prg0/apl and paste.

Yep exactly And also remember about HACKMODE.KEY file in root of your SD

No no, it was a test, wrong test, forget it You just do something wrong :> /USER/PRG0/Apl/Av.exe <-- stock exe, delete. then copy: /USER/PRG0/Apl/Av.exe /USER/PRG0/Apl/Av.mscr /USER/PRG0/Apl/MortScript.exe /USER/PRG0/Apl/cecmd.exe /USER/PRG0/Apl/Restart.exe /SDMMC/HACKMODE.KEY <--- this is how it should be, correct path for copied hackfiles. Check if everything is in correct place.

Thanks for posting results Yes, revert it back. Then for first delete Av.exe from PRG0, and after that copy hackfiles (to PRG0 only). PRG1 shouldnt be touched.

Have you tried standard TestMode 2.3? GGV1345 has got TestMode directory with NNTestMode.exe, like in TestMode 2.3. Try it

Hmm Z130BT copy Is this means that you tested HACKMODE on this model? I think that I know why you have problems to jump into normal software. It can be caused by z110-to-z120 upgrade. I think that your PRG1 is from old firmware. You should try to: 1) make another copy of your backup PRG0 directory, 2) rename unmodified copy of PRG0 to PRG1, 3) delete PRG1 from the avic, 4) copy prepared PRG1 to avic (should be with same content as PRG0), 5) delete from PRG0 Av1.exe, Av.mscr, and copy the old HACKMODE files. Please post the results. Br Condi

How can I help with that? Just write

1) you dont have PRG1 directory in your system? if yes then try attached modified test version (with your Av.exe), let me know if it works, 2) its hard to hit the close button, try with pen or stylus, if not - then search for the calibration of touchscreen (calibration - was it in pioneers service menu?) 3) i've got to look into it - maybe its concerned in total commander app... or... maybe not 4-6) yes same in my unit, will look into it. Also If you could upload your system backup, or at least write directory structure, like: NAND/PRG0/Apl/; NAND/PRG1/Apl; NAND2.., NAND/Apl etc. Whe

Nice to hear that it wasn't related with HACKMODE No problem, link with files is in the first post in this topic, also with 'how to' instructions Post here, let me know if it works on your device! br condi

Yeah you're lucky to have wince desktop/explorer To run garmin you've got to use some sort of portsplitter as I remember Keep on posting all the news with X920BT! br condi

No problem post here is it working ok for you, and on which unit! Hmm.. I think yes of course it will need a lot of work but I think that this can be done For now we've got very handy entrance into hackmode Im not at home, mountains till wednesday, I've got few ideas about gps port, will work on this when I come home! Exactly good beginning about Av.exe - it runs another copy of this executable from PRG1, so it runs exactly your version Take a look into your backup and compare Av.exe from PRG0 and PRG1 if the files are identical? And btw thanks for posting results, nic

Uploaded..

OK beta tests 3..2..1.. go keep posting, any suggestions, questions, thoughts are welcome! br condi

Hi guys, Tomorrow I will backup my units files and post it here. Today again - ten or more tries to get rid of that annoying AV app. Its time to go further, tomorrow I will make some risky thing with Av.exe. Wish me good luck, dont want to have expensive coffeecup stand :D I would like to give final solution, 100% usable, not only for limited 30s time. Its my no.1 objective PS. 10-18 in work, if I could have more free time... br condi ---edit: found some useful app for pc > "depends" - open .exe for wince, and check which libraries it needs tomorrow I w

I've got also Sandisk Extreme 32GB - class10, extra fast works great on F30BT. br