rmw04c

Yeah...I've wanted to throw it out the window several times. I didn't end up sending it to Pioneer because I didn't want to be without any type of stereo in my car for the XXX months they would have it, only to tell me it was somehow my fault. I appreciate the info...I'm going to look into that. Do you know which files would need to be copied over to the unit in order to perform the update? Or does anyone else on here know what process the update takes?

Ok so some of you have probably seen my issues, but I'll highlight here. I have an X930BT and have tried updating my splash screen...can't do it. Tried updating to the 2012 upgrade...can't do it. Tried updating to the 2013 upgrade today...can't do it. All of these come back with an update failed. The map upgrades get to 99% before they say it. I believe that there is some type of write/permission issue that my unit has that is preventing any of these from writing to the internal memory. However, using test mode I am able to copy/paste files as needed. So my question is this: Is

You can download the original firmware update from Pioneer still (its the only thing you can download from their website for X930BT). Once you download those there's a folder you get called "AVICZ110". In that folder, you navigate to PRG0 and copy that whole folder to an SD card. Copy the contents to your PRG0 folder on your HU, and you should be good to go to follow the rest of the instructions I posted. In the meantime, you can listen to your FM radio via testmode (not Sirius, unfortunately....). I did that for like 3 months lol.

How do I do it via USB? I feel like it won't even read the files from a thumb drive

Ok dude after a 4 month break, fresh start, I got out of it. Here's what I did: - Download original update AVICZ110 from Pioneer on fresh SD - Install Update. It came through and said "incorrect SD, please insert correct SD card" or whatever. This is good. This means its now in update mode, which we can get out of. - Went in to test mode, deleted my PRG0 folder contents, and recopied over the originals from the update files (AVICZ110) - Went into test mode, went into user->system->download and deleted the startknd.log out of there, and boom, it works. Its still not updated, b

Its definitely an internal glitch...I've tried the premade ones on here for the x930....none will copy over. Is there a way to manually copy it using test mode?

I'm in the same boat...and have been for months. I can get in Testmode, so I just use my radio functions through there...but we're both screwed. Let me know if you find out how to fix it!

6 weeks and nothing? Hmm.

Ok so I'm sure some of you have already seen my posts in other threads over trying to update my x930 from 3.0001. I appreciate the advice of Pionara and RonS, as it has helped me in the past to at least recover the unit back to 3.001. As of 2 months ago, I had tried everything, downloaded the files from 3 different sources, changed 4 different SD cards, 2 different computers, to no avail. This thing will NOT update. So, despite my reservations, I decided to try the ebay route since I know that even though you're paying for a free service, many had seen success since the files he was provid

I completely understand that you probably just ignore a lot....which is why I included so much in my message. I've literally researched every thread I can find on here. I've downloaded the file from 3 separate sources, switched 3 different SD cards, tried both mac and PC, and can't seem to get it to work. Each time I've had to manually get it out of upgrade mode. I've given up at this point because I'm convinced there has to be something wrong with the unit itself. And the fact that its showing 2012 splash screen is even more screwed up. Any thoughts from there? Thanks!

Pionara, did you ever get my message about this upgrade? I haven't gotten mine to work in almost 2 months. Any ideas on why it won't work?

Anyone else have any ideas?

Ok did that and was getting a "Program Start Error" on startup....wouldn't recognize SD cards again. Reloaded the original RenewallFLib.dll from PRG1 and it boots fine now. Getting a 2012 splash screen, but everything else is still on the old 3.0 firmware, and says version 3.0001. Not sure what else to do here...I've done all I know how. Is it possible that somehow both versions of the update I downloaded were corrupted somehow? I compared the MD5s and they are identical...but that's really the only thing I have left to check? Update: Was able to manually edit and successfully copy t

Checked that...was absolutely able to get it to boot into regular mode after deleting that file. Thanks for that! Now I at least know how to get it operational. Update: I tried the update again with a freshly formatted SD card, still no luck. Same failure at 99%. I started digging deeper, and checking into the old method, I opened my original RenewallFLib.dll in a hex editor and it hadn't been edited by autoreplace. I manually edited it and am going to shoot it over again now and retry the update to see if that maybe fixes it. Will get back to you shortly

I just re-formatted the SD and tried without luck. tried all forms of copy and unzip with no luck. Could not get it to pick up my usb drive...not sure what to do there. I've literally run out of options that I know what to do at this point. Any help is appreciated!

I have a VM, which is essentially the same thing...but I could try my old PC I guess...I've done the drag and drop thing in my VM, as well. I'm loading it onto a usb drive right now to try that, instead....but that's the last thing I can think of. Thanks for responding! Oh and I'm using WinRAR 3.71

Anyone? I'm at a loss.

Ok I've been trying this for a few hours...I have an x930BT and have had it updated to 3.001 for quite some time. Trying to do the supereasymethod update but I keep getting the "an error occurred and the update failed" with a retry button after the first part of the install gets to 100%. I downloaded the update from the reposted link that someone posted on the original update thread. I'm downloading the torrent version now to try that but here's what I've done so far: Switched SD cards (was using a SanDisk 32gb, switched to a different brand 16GB sd) Was doing this on my mac, so I swit

My X930BT won't install new splash screens from the SD card. It will read them and display them correctly on the screen, but then says "Splash Screen Update Failed" as soon as I click OK. Called Pioneer and their solution was reset (which was done, no dice), and then send in for service. Also tried formatting the SD Card, used a DIFFERENT SD card....but nothing will work. Any ideas before I send this stupid thing in to Pioneer?

Hello all. I've had the 930BT for about 5 months now. I bought a new car, and installed it today in my new car. FIRST TRY when I turned it on, it asked for my password (which I know, and confirmed it's correct using test mode), but all keys were grayed out and I could not enter anything. Disconnected power, checked all wiring, and tried again with no luck. Test mode functions fine, but this thing is locked for sure. Any ideas?