Where to connect the microphone to Pioneer AVIC-Z110BT radio?there isn't a port.

[HandsomeSteve]

Where to connect the microphone to Pioneer AVIC-Z110BT radio?there isn't a port.

when I press the button left of volume then speak play whats is name band  the AVIC can't understand is the resopnse.

the only port that the 3.5mm plug will fit into is the wired rotory commander remote control.

all the pioneer manuel mentions is positioning an attaching the mic end not one word about where to plug in.

the seller says it works on the AVIC Z110BT

https://www.amazon.com/gp/product/B015KY5J7Y/ref=ask_ql_qh_dp_hza

 

thanks for advising

 

[RonS]

https://www.pioneerelectronics.com/PUSA/Unassigned-Content/Manuals/AVIC-Z110BT+INSTALLATION+MANUAL

[HandsomeSteve]

all the pioneer manuel mentions is positioning an attaching the mic end not one word about where to plug in

[RonS]

3 hours ago, HandsomeSteve said:

all the pioneer manuel mentions is positioning an attaching the mic end not one word about where to plug in

Did you look at the Z110-BT Installation Manual I provided a link to? The diagram on pgs 8-9 shows the mic and where to plug it in. The jack even has a marking "MIC IN"

[HandsomeSteve]

I ordered a3.5mm plug bc the seller said it would fit when in reality I need 2.5mm plug thanks Ron S