ltaxson Posted March 21, 2008 Report Share Posted March 21, 2008 I just recently bought my Z2 and I love it - except for my bluetooth echo issue. The other thing I am having an issue with is that I never see the night time display for the maps. I always have the day time maps displayed even at 10:00 PM. In reading the manual it states that the night time display only appears when the car lights are turned on. I guess my installer forgot to hook up a wire or something. My question here is, do I need to have this wire hooked up or is there another way to get the night time view to work. If I do need to hook the wire up, which wire is it and where does it go? Thanks for your help!! Quote Link to post Share on other sites
openendstraight Posted March 22, 2008 Report Share Posted March 22, 2008 first check and see if for some reason you have it set to day time. There is a setting for auto. Press menu. Then map. Then make sure that the the Day/Night display is set to auto, not day. Quote Link to post Share on other sites
ltaxson Posted March 23, 2008 Author Report Share Posted March 23, 2008 Thanks for responding. I have it set to Auto, but I think that the wires need to be setup to bring up the night time display. You would think there would be a Day, Automatic and Night setting. Do you happen to know if there is another way to get the night time view without connecting the wires? Thanks Larry Quote Link to post Share on other sites
vastmax Posted March 24, 2008 Report Share Posted March 24, 2008 the illumination wires need to be connected behind your z2, apparently your installer didnt do that... Quote Link to post Share on other sites
jrhunkler Posted March 24, 2008 Report Share Posted March 24, 2008 I have the same problem and the illimination wire is working correctly, but still no night mode! swapped it out today for a brand new HU thinking it may have been that, but still no luck? wtf? Quote Link to post Share on other sites
inferno999 Posted March 25, 2008 Report Share Posted March 25, 2008 I have the same problem and the illimination wire is working correctly, but still no night mode! swapped it out today for a brand new HU thinking it may have been that, but still no luck? wtf? ...then what makes you think the wire is working properly? Quote Link to post Share on other sites
jrhunkler Posted March 25, 2008 Report Share Posted March 25, 2008 they said they "tested the wire" Quote Link to post Share on other sites
kingoftypos Posted March 25, 2008 Report Share Posted March 25, 2008 I am not sure about where it is on the Z-2, but on my D-3 there is a hardware menu. In this menu you can check for proper connection of different things. Including the headlight wire. When you are in that menu, turn your head lights all the way on, then all the way off. Does the setting change? If not, take it back to have the installer fix it. If it does, then you may have to double check your day/night settings as stated above. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.