GatorRam Posted April 7, 2008 Report Share Posted April 7, 2008 I bought one of these of ebay and installed it to my AVIC D3. There is power to the unit and the d3 recognizes it but there is no audio and I can't change it off of channel 18. I did unplug the bus cable from the BT unit that the sirius unit is passing through and plugged it back in and the audio came through for a min. and I got it to go to ch 184 once but after that it just started flashing "aquiring signal" fo about 5 min. I shut the truck off and started it back up and it was stuck on 18 again. I haven't been able to make it do anything else since. Anyone else have a problem like this? Thanks, Adam Quote Link to post Share on other sites
kaplan_reject Posted April 7, 2008 Report Share Posted April 7, 2008 Make sure that none of the small pins on the bus cable are bent or moved out of place and the make sure that the cable is plugged into the correct ports. Quote Link to post Share on other sites
cntrylvr79 Posted April 8, 2008 Report Share Posted April 8, 2008 You sure it's on channel 18 and not 184. If it's stuck on 184 then that's normal with a tuner that hasn't been activated yet. Quote Link to post Share on other sites
mabbaticchio Posted April 8, 2008 Report Share Posted April 8, 2008 I had the same exact problem. It was stuck on the last channel that it was on when it was working with no audio. I had to buy a new one. That sucked. Quote Link to post Share on other sites
primitivepete Posted May 20, 2008 Report Share Posted May 20, 2008 I had this same problem. I opend the box and found the heatsink was loose. I jiggled it and the signal came in so I fashioned a metal spring clip and taped it to the inside of the box which holds the heatsink down firmly when the box is screwed together. Worked for me. good luck! Quote Link to post Share on other sites
subsonickharma Posted May 20, 2008 Report Share Posted May 20, 2008 i had the same problem, my box was fried, had to get a new one. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.