Jump to content
AVIC411.com

GEX-P10XMT with Z1 connection question


Recommended Posts

You should read the installation manual or open the box and you will find that there is a yellow and red power wire on the harness. That is why your quote says "The Installation Manual incorrectly states that both leads should be connected." When you finally open the box you will also see the bright yellow sheet of paper which is "A manual correction sheet is provided" That piece of paper will provide a handy illustration of exactly what I have told you

 

Bottom line...Skip the red, connect the yellow power wire or your shit won't work

Link to post
Share on other sites
You should read the installation manual or open the box and you will find that there is a yellow and red power wire on the harness. That is why your quote says "The Installation Manual incorrectly states that both leads should be connected." When you finally open the box you will also see the bright yellow sheet of paper which is "A manual correction sheet is provided" That piece of paper will provide a handy illustration of exactly what I have told you

 

Bottom line...Skip the red, connect the yellow power wire or your shit won't work

 

You're right, the yellow cable has to be connected anyway.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...