Split Posted June 8, 2008 Report Share Posted June 8, 2008 Hi, i'm new here, its a great web. I have an AVIC N3 that don't power up, I don't know if the hide away module is needed to power it up, but i read on other forums that the headunit will power up and don't show any images on the screen without the hide away module. I put 12 volts on my headunit and don't show any signs of power, no front lights and no fan. I buy it throught ebay as-is, and its missing the GPS antenna,RGB cord and remote control. It included a AVIC N2 module, but I think this will not work with this headunit. Any advice??? Quote Link to post Share on other sites
ryan420 Posted June 8, 2008 Report Share Posted June 8, 2008 The N2 brain will work with the N3 deck but u need 1 data cable..1 power harness and 1 rca harness and 1 gps antenna and 1 antenna extention and of 2 dvd's Quote Link to post Share on other sites
Split Posted June 8, 2008 Author Report Share Posted June 8, 2008 OK, but the headunit will show any signs of power if I test it without the hide away module? Quote Link to post Share on other sites
whtcrxghst Posted June 8, 2008 Report Share Posted June 8, 2008 No Quote Link to post Share on other sites
Split Posted June 8, 2008 Author Report Share Posted June 8, 2008 Oh thanks. I will get the data cable, and the gps antenna... Quote Link to post Share on other sites
Split Posted June 22, 2008 Author Report Share Posted June 22, 2008 Need help here! I get a Avic N3 GPS module with all the wires, plug it in the headunit but it only powr up the rear fan, there's nothing on the front display and no backlight on the front panel or detachable faceplate. I can hear the fan spinning for 20 seconds and then shuts off, and then it powers up again for 20 seconds. any suggestions?? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.