pappasaid Posted November 25, 2008 Report Share Posted November 25, 2008 Just installed a new 90BT unit and when I try to set up all the settings I only have access to about half. I cannot access anything in the phone menu and only the av and audio settings in the main settings menu. I have tried the reboot, but nothing changes. Anyone else have this problem? Quote Link to post Share on other sites
brink094 Posted November 25, 2008 Report Share Posted November 25, 2008 Check the handbrake connection, some functions are only available when the handbrake is applied. It's described in the manual. Or you could just do the bypass, then you don't need to use the handbrake Info is in the hacks/mods forum. Quote Link to post Share on other sites
terron Posted November 25, 2008 Report Share Posted November 25, 2008 you didn't apply the parking brake or you didn't apply the hardware bypass or you didn't apply the software bypass Quote Link to post Share on other sites
skicrave Posted November 25, 2008 Report Share Posted November 25, 2008 you didn't apply the parking brake or you didn't apply the hardware bypass or you didn't apply the software bypass The parking brake lead still needs to be grounded with both the hardware and software mods, so technically just saying he didn't apply the parking brake is all that is needed. Quote Link to post Share on other sites
terron Posted November 26, 2008 Report Share Posted November 26, 2008 you didn't apply the parking brake or you didn't apply the hardware bypass or you didn't apply the software bypass The parking brake lead still needs to be grounded with both the hardware and software mods, so technically just saying he didn't apply the parking brake is all that is needed. thanks captain technicality Quote Link to post Share on other sites
pappasaid Posted November 26, 2008 Author Report Share Posted November 26, 2008 Thanks for all the help and cynicism. It was definitly user error. I was using the back up light wire to the parking break. Total "Brain Fart!" Quote Link to post Share on other sites
skicrave Posted November 26, 2008 Report Share Posted November 26, 2008 thanks captain technicality Not trying to be a jerk, just wanted to save someone that reads this later the hassle or confusion that results from doing the hardware or (especially) the software mod only to find out that they still can't access certain screens. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.