IS 300 Posted December 27, 2008 Report Share Posted December 27, 2008 I have a Z3 and i am trying to bypass were i can watch video while driving. I have the parking brake grounded. I was told that as soon as the Z3 starts booting to turn your parking lights on and off about 2 to 3 times. I do not have the connector #2 harness. So how can i bypass? Quote Link to post Share on other sites
garrettoomey Posted December 27, 2008 Report Share Posted December 27, 2008 You can only bypass the Z3 by grounding the correct pin in connector 2. http://www.sminntech.com/z1flash.html#newbypass Flashing will NOT work for a Z3. Quote Link to post Share on other sites
YeeeeG35 Posted January 5, 2009 Report Share Posted January 5, 2009 I don't know if I just got a brand new design or what... but my connector 1 has all 4 of those pins with wires in them. The link you've supplied is for a Z1 and says for 06/07 so mines an 08, which wire other than the Ebrake wire do I ground? Quote Link to post Share on other sites
CamelTowing Posted January 5, 2009 Report Share Posted January 5, 2009 There are two connectors. Just follow the instructions he linked Quote Link to post Share on other sites
YeeeeG35 Posted January 5, 2009 Report Share Posted January 5, 2009 You didn't read what I said. I even put a picture showing my two connectors. My connector does not have any open pin locations at all. My connector does not look like the one in his picture. Quote Link to post Share on other sites
CamelTowing Posted January 5, 2009 Report Share Posted January 5, 2009 Let me rephrase...There are two white connectors besides the main black one. You are missing one. Get it. Then follow the instructions Quote Link to post Share on other sites
YeeeeG35 Posted January 6, 2009 Report Share Posted January 6, 2009 Ahah, thank you very much... I feel like a tard now. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.