doctr_nick Posted January 24, 2009 Report Share Posted January 24, 2009 Hey Guys, I just got a F700BT for my 04 Infiniti G35 Coupe and got a little ahead of myself with the installation. I talked to a few people before installing myself and they told me that I just needed a proper wire harness for my car and that would be it. Well I installed the unit with just the wire harness, and it is working, but the sound isn't really any better than my original Bose head unit. The bass doesn't seem to "kick" like it did before, and I seem to get more buzzing and heavy rattling vs. pounding. After doing some more research, I found out theres something to do with the output levels of the F700 being different than the input levels of the Bose Amp (apparently something with the Bose system being 2 ohms). Thus you would need to install something like this: http://www.crutchfield.com/p_142C4NN03/ ... ml?tp=3486 However, I've also heard that you can use the RCA Amp pre-outs of the F700 and use a RCA integration harness like this: http://cgi.ebay.ca/1996-2007-INFINITI-A ... .m20.l1116 My question is, does anyone know which method of hook up is better and why? Any help would be greatly appreciated. Quote Link to post Share on other sites
relisys_3200 Posted January 24, 2009 Report Share Posted January 24, 2009 I recently installed my F90BT in my 2003 Nissan Altima with the Bose system and I used this amp integration harness.. http://www.installer.com/item/display_i ... it=70-7551 It is indeed like the last link you posted and does utilize the headunit's pre-outs. I have no problems what-so-ever and it sounds great! Quote Link to post Share on other sites
doctr_nick Posted January 25, 2009 Author Report Share Posted January 25, 2009 Yeah, I thought of using the RCA hook-ups just for simplicity, but I just don't know if it would be better to go the other route and use a signal adapter with gain adjustments. Right now I have the speaker level outputs from the head unit spliced directly to the wire harness and can definitely tell you that that's not the way to do it...lol. I have it working, and it produces "decent" sound, but like I said my base doesn't "kick" anymore with the beat, and tends to buzz more. There's also this static sound I notice when turning the volume up. It's not crackily or anything, but just something I notice when the music in a song quiets down. I never get complete silence from the unit. Most likely electrical noise from the mismatch between the head unit output and the input required by the amp i guess. I dunno. Quote Link to post Share on other sites
doctr_nick Posted January 27, 2009 Author Report Share Posted January 27, 2009 Can anyone offer more insight? What would be the optimal way to hook things up and what would be the reasoning? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.