gte534j Posted February 15, 2009 Report Share Posted February 15, 2009 Hi, I was trying to boot the Avic F700bt into windows CE using testmode. I got it to boot up fine into testmode, it copied some files, and the windows CE desktop appeared, but when i go to start/explorer, it freezes on me. The screen turns green, and I can not do anything. I have the latest software version 2.0 installed. I also searched in the forum and could not find any answers. Any suggestions? Quote Link to post Share on other sites
another gsxr 1k Posted February 15, 2009 Report Share Posted February 15, 2009 Hit the X in the top right corner. then go to the control panel and align the scrren. Quote Link to post Share on other sites
gte534j Posted February 15, 2009 Author Report Share Posted February 15, 2009 hi, i hit the x in the top right corner and it froze. the screen turned mostly green. i then rebooted and tried again, but went to start/control panel. once again, that box turned green and the unit froze. I did not see "align screen" in the start menu. Quote Link to post Share on other sites
blackh8552 Posted February 15, 2009 Report Share Posted February 15, 2009 screen calibration is in the normal avic menu under settings ... do the calibration then use the sd card and boot into test mode Quote Link to post Share on other sites
gte534j Posted February 16, 2009 Author Report Share Posted February 16, 2009 hi, i did the screen calibration in the regular AVIC menu, then tried to reboot the system into Windows CE and it still froze on me whenever I tried to do anything. Any other suggestions? This seems very odd Quote Link to post Share on other sites
Garry Posted February 16, 2009 Report Share Posted February 16, 2009 Same thing happening to Me on testmode bootup! Any Ideas? Quote Link to post Share on other sites
Garry Posted February 16, 2009 Report Share Posted February 16, 2009 Same thing happening to Me on testmode bootup! Any Ideas? Quote Link to post Share on other sites
skicrave Posted February 16, 2009 Report Share Posted February 16, 2009 Mine did that the very first time I tried to boot into Test Mode (way back in August). Ever since then it's been fine though and I haven't had any problems. I'm not sure what to tell you other than to reformat your SD card and try again. Quote Link to post Share on other sites
gte534j Posted February 16, 2009 Author Report Share Posted February 16, 2009 i tried that, no luck. i wonder why it freezes? Do you think Pioneer could help out? probably not Quote Link to post Share on other sites
Hennessy08STI Posted February 16, 2009 Report Share Posted February 16, 2009 This happens to me every time, I was able to use the end of a pencil so i could hit the very top right corner, it might take a few times of hitting it but IT WILL WORK. just keep trying to hit it at the top right corner. even after you hit it the first time and the green box pops up in the center just keep trying to hit the top right x, after many tries it always works for me but just takes time. Quote Link to post Share on other sites
gte534j Posted February 17, 2009 Author Report Share Posted February 17, 2009 great, it worked! thanks for the advice, the pencil tip worked well. Quote Link to post Share on other sites
skicrave Posted February 17, 2009 Report Share Posted February 17, 2009 Nice post Hennessy08STI! After that calibrate the touchscreen while in CE. Quote Link to post Share on other sites
Hennessy08STI Posted February 18, 2009 Report Share Posted February 18, 2009 Thank you, and yes i will calibrate the screen while in CE i didn't think of that. Thanks Skicrave Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.