Neric Posted February 23, 2009 Report Share Posted February 23, 2009 is there is a way to do that ...since it is Microsoft platform afterall Now I canot boot at all the systm just shut down while loading the test mode I was wondering if there is a boot disk where I can just copy my good copy of flash drive to the machine flash drive I did delete the contant of the flash drive in order to reinstall a fresh copy so I am wondering how can I get to do that Quote Link to post Share on other sites
sccarlso Posted March 11, 2009 Report Share Posted March 11, 2009 I'm not sure how the testmode does it's thing, but it may have done more than just erase something and make it not boot again. It should still boot to testmode again. Most devices like this should always look for a bootloader on the SD and go from there. The only way would be if you had an SD card with the right data to tell the unit to boot and copy to the onboard flash from scratch including reformatting it. But if that loader is horked, I think youre stuck. Not sure if this would work, but since Pioneer sells SD cards specifically for upgrading with the 2.0 files on it, but you should be able to do it yourself, have you tried putting the 2.0 upgrade files on an SD by themselves using the pioneer process to upgrade the unit instead of trying to keep reloading testmode? I'm not fluent in these yet, so just throwing this out there. good luck! Quote Link to post Share on other sites
another gsxr 1k Posted March 11, 2009 Report Share Posted March 11, 2009 Neric, I have a copy of the entire flash drive, from Windows to the maps online at a backup site. Just pm me your email address and I'll get you access. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.