mike0183 Posted March 21, 2009 Report Share Posted March 21, 2009 Installed a P10 HD tuner with my Z2...when soure is pushed to get to HD... Screen comes up with all the controls. but it reads tuner er, and I can't use any controls..it seems everything on hd is frozen.....any thoughts on this?? Quote Link to post Share on other sites
EssTEye Posted April 23, 2009 Report Share Posted April 23, 2009 I'm looking at the Pioneer website and the GEX-P10HD is only compatible with the following units: FH-P800BT, FH-P8000BT, DEH-P700BT, DEH-P7000BT With the additional note: "External Control" capable with other Pioneer IP-Bus headunits, a/v receivers and navigation systems, with some limitations of display and control. Please review Owner's Manual(s) for more details. My question to you is, what does the Owner's Manual for the Z2 say about HD radio? I wasn't aware that the "Z"s were HD ready. This could explain the problem perhaps? Matt Quote Link to post Share on other sites
garrettoomey Posted April 23, 2009 Report Share Posted April 23, 2009 The Z2 owner's manual can be downloaded here: http://www.pioneerelectronics.com/PUSA/ ... C-Z2?tab=D Quote Link to post Share on other sites
Twin Que Posted April 23, 2009 Report Share Posted April 23, 2009 I just hooked an HD to my Z3. It works fine. It does what other radios do, RDS. Fortuntely most stations in my are simul cast in HD. It works well but I really can't hear a big difference.......... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.