TrePaul86 Posted April 4, 2009 Report Share Posted April 4, 2009 So since my tranny swap my D3's navi doesn't really work. It has no idea where I'm going. It still finds places, but once I start going places it tells me to turn around and starts changing my route. I had to completely take it out when I was changing out interior pieces but nothing major. Just unplugged the harnesses that were on it. Now because my VSS isn't hooked up could this be causing it? I know the speed wire is tapped at the GEM for the VSS coming from the PCM, but since my VSS isn't attached right now is that why it can't find me? The VSS will be fixed on Friday next weekend, along with my Reverse sensor. When I'm in route (say I punch something in for it to tell me how to get there) it doesn't lay me on top of the street I'm on and it kinda jumps back and forth from the location to where I am.... Shouldn't it be working off the the GPS and not my VSS? The VSS only lets me use the speedometer in the D3 itself, or so I thought. Why can't I just type something in and go? What's going on? Quote Link to post Share on other sites
g35rider007 Posted May 12, 2009 Report Share Posted May 12, 2009 Yes, you need to hook it up to get all the functions working properly, when I installed mine I hooked up improperly and I was having a few problems with my Avic D3 but after I realized and fix the problem, now my Avic d3 works great. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.