thedead Posted May 22, 2009 Report Share Posted May 22, 2009 Hi Guys, I have my D3 installed and working right now; however I am using the D3's amp not my Bose in my 05 Altima. I got the new harness for low level RCA so my AMP can do the work - not the D3. My question is, the first time around I used electrical tape...its going to take 1hr to remove it all now. Is electrical tape the best idea? should I use Murettes (sp?) I don't have a soldering iron so that is out of the question. I live in Ottawa, Canada, so the inside of my car can go from -40 to +50/60 Celsius Quote Link to post Share on other sites
BuffaloSS Posted May 26, 2009 Report Share Posted May 26, 2009 So the first time you twisted wires and taped them, and now you are looking to rewire and use some sort of crimp connectors? You're fine either way. I used butt-end connectors (crimps) and they have worked fine for over 1.5 years. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.