Jump to content
AVIC411.com

Recommended Posts

Hey Guys,

 

I have had this ever since I wired up the system, and have started trouble shooting, and its driving me nuts!

 

When The unit powers on (even with engine off), I get a loud pitch whine through all speakers. Here are some general setup details, and troubleshooting done:

 

1. System - Pioneer Avic F90BT. PG RSD 500.4 Amp. PG RSDc 6.5" Comp set. Redtop Batt.

2. 0ga wiring for + and - all the way to the back. 14ga for speakers, and DBLink/Monster RCAs (most is for more gear)

3. When RCA is unplugged from amp, noise gone

4. When RCA is unplugged from deck only, noise gone

5. If you touch the male portion of the RCA to the deck chassis, noise!

6. All Power/Ground is on one side of the car, and signal on the other.

7. Battery to Chassis is 0ga

8. Deck is ground to Chassis Ground going into OEM deck harness (larger wire than the Metra kit)

 

Thanks

John

Link to post
Share on other sites

it could be a problem with the RCA outputs in the deck, i have seen this a few times with pioneers, i beleive there is a small fuse or something inside the unit that protects it. all cases i have experienced had been fixed with a trip to there service center for repair.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...