DarkMaster Posted July 22, 2009 Report Share Posted July 22, 2009 Could someone post the SDMLC file for an F900. I have been scouring this site and have yet to come across a copy. I haven't bricked my unit but i need this file to possibly fix the error that the MSN direct is giving me"firmware update failed"...and of course Pioneer say"just send it back" with no guarantee or RMA number just a hope and a prayer that it will magically get back to me, so any help will be appreciated. thanks Quote Link to post Share on other sites
DarkMaster Posted July 22, 2009 Author Report Share Posted July 22, 2009 I have a backup of my unit but my MSN direct is funky, and has been funky since 2 weeks after i got it(see above Post). If anyone wants it i will post it...but I would really love a copy that is known to work. Here is the liink IT DOES NOT WORK FOR ME, you however might have better luck. http://www.4shared.com/file/119936749/c ... 09984.html And I am still looking for a confirmed working Dump Quote Link to post Share on other sites
DarkMaster Posted July 23, 2009 Author Report Share Posted July 23, 2009 Aww cmon guys...this is easy...in fact testmode already has all of the tool you need to accomplish this little feat, It would fix(hopefully) my unit, and it only takes a few steps. 1: boot into testmode with the new version of it Test mode can be found here http://itchybot.com/3.0%20Install%20Files.zip simply extract the folder called test mode onto an empty SD or USB drive, you can ;ignore all of the other files 2:select DiskRW 3:select read(should already be done) select SDMLC and give it a place to go in the propmpt(an SD or USB card )... 4:hit read let it work until it says completed(should only take 48 sec) 5:upload the img file that was created on your card to a filesharing site or PM me. Please note It has to be from an F900, if it is not my unit will not boot. Thanks in advance Dark Quote Link to post Share on other sites
DarkMaster Posted July 24, 2009 Author Report Share Posted July 24, 2009 Anyone? Quote Link to post Share on other sites
carver Posted July 25, 2009 Report Share Posted July 25, 2009 2 DarkMaster, i shared my f90 UC dump before, so, you can try use it at UC version http://www.4shared.com/account/file/105 ... 09984.html aso, i see baskup from you link, it also for UC, but also few bytes different also. but i think problem not in SDMLC, if testmode working, 1) try wrute sdmlc 2) copy winceimg to sd and write it from uboot 3) back to testmode again 4) format my flash disk, and copy any backup to it 5) try reboot and check avic. Quote Link to post Share on other sites
DarkMaster Posted July 25, 2009 Author Report Share Posted July 25, 2009 2 DarkMaster, i shared my f90 UC dump before,so, you can try use it at UC version http://www.4shared.com/account/file/105 ... 09984.html aso, i see baskup from you link, it also for UC, but also few bytes different also. but i think problem not in SDMLC, if testmode working, 1) try wrute sdmlc 2) copy winceimg to sd and write it from uboot 3) back to testmode again 4) format my flash disk, and copy any backup to it 5) try reboot and check avic. Have yet to try an F90 but i do not think it will work...i think it has to be an F900 Also what are the other 2 disk selections for in DiskRW? Quote Link to post Share on other sites
Fred2yu Posted July 27, 2009 Report Share Posted July 27, 2009 Aww cmon guys...this is easy...in fact testmode already has all of the tool you need to accomplish this little feat, It would fix(hopefully) my unit, and it only takes a few steps. 1: boot into testmode with the new version of it Test mode can be found here http://itchybot.com/3.0%20Install%20Files.zip simply extract the folder called test mode onto an empty SD or USB drive, you can ;ignore all of the other files 2:select DiskRW 3:select read(should already be done) select SDMLC and give it a place to go in the propmpt(an SD or USB card )... 4:hit read let it work until it says completed(should only take 48 sec) 5:upload the img file that was created on your card to a filesharing site or PM me. Please note It has to be from an F900, if it is not my unit will not boot. Thanks in advance Dark I know you need a F900-- mine is a f90 with the 3.0 version on it. If you get desperate and want to try mine, PM me; I am not sure I follow all the steps above (have never done them), but I'm comfortable with Testmode and WinCE... Quote Link to post Share on other sites
foxyloxy Posted July 29, 2009 Report Share Posted July 29, 2009 This is from my UK F900BT v2.007 hope it helps http://rapidshare.com/files/261536784/S ... 4.img.html Quote Link to post Share on other sites
jonny42 Posted July 30, 2009 Report Share Posted July 30, 2009 Hello, I need please urgently a dump file for a F900BT EU! With pleasure also by PM.The file from "foxyloxy" does not work with my F900BT. Sorry for my bad English. Thank you Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.