Surovich Posted July 29, 2009 Report Share Posted July 29, 2009 I have heard that since the 3.0 update that Pac's steering wheel controls have issues? Quote Link to post Share on other sites
CalTom Posted July 29, 2009 Report Share Posted July 29, 2009 After going to 3.0, all my controls stopped working. No clue why... Quote Link to post Share on other sites
bartsitarski Posted July 29, 2009 Report Share Posted July 29, 2009 The PAC unit probably needs to have the software updated to the new X Series Software. I would contact PAC to see about an update. Although, I would wait until the official Pioneer release because you are running pirated software at this point. Kinda like going back to the bank you robbed to exchange red dyed money. Quote Link to post Share on other sites
Surovich Posted July 29, 2009 Author Report Share Posted July 29, 2009 Just curious if others reported this ... Quote Link to post Share on other sites
lupohki Posted July 30, 2009 Report Share Posted July 30, 2009 I had non-working / really slow wheel controls when I updated to 3.0 and didn't delete the flash disk contents first before copying over the new files. After I reinstalled, deleting the contents of the flash disk first, everything worked fine. I didn't have to reprogram the PAC. I have a f90bt. Quote Link to post Share on other sites
hanibal Posted July 31, 2009 Report Share Posted July 31, 2009 My controls work better with 3.0 and have had no problems with the pac. Quote Link to post Share on other sites
bartsitarski Posted July 31, 2009 Report Share Posted July 31, 2009 I may depend on what version of the PAC you have. For example, my old PAC didnt give enough juice through the accy connection and I had to run a 12v switched wire. I ordered a new PAC adapter because I wanted to rewire everything and the new one works perfectly. Just a thought. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.