orangesuburban Posted November 3, 2009 Report Share Posted November 3, 2009 Hey guys, i just did the 3.0 update thanks to http://avic411.com/forum/viewtopic.php?f=34&t=25817 and i just want to add that i did everything on a mac (read some comments on people having issues doing the SD stuff via a mac.) but my questions are this. 1, ive searched but cant find a link to 3.01, where can i get this? 2, now that i did the x910 is my unit considered an X unit? do i need to keep an eye on the X forums for hacks and mods, or is everything still an F unit and i stay put in this forum? 3, does the link i posted, and the files used in that contain the most up to date maps, if not, where can i find those? thanks guys! edit. answers i found already 3, newest maps are 2009.6 found here http://avic411.com/forum/viewtopic.php?f=34&t=27547 Quote Link to post Share on other sites
crilleym Posted November 3, 2009 Report Share Posted November 3, 2009 Hey guys, i just did the 3.0 update thanks to http://avic411.com/forum/viewtopic.php?f=34&t=25817 and i just want to add that i did everything on a mac (read some comments on people having issues doing the SD stuff via a mac.) but my questions are this. 1, ive searched but cant find a link to 3.01, where can i get this? 2, now that i did the x910 is my unit considered an X unit? do i need to keep an eye on the X forums for hacks and mods, or is everything still an F unit and i stay put in this forum? 3, does the link i posted, and the files used in that contain the most up to date maps, if not, where can i find those? thanks guys! edit. answers i found already 3, newest maps are 2009.6 found here http://avic411.com/forum/viewtopic.php?f=34&t=27547 1. http://www.pioneerelectronics.com/PUSA/ ... port?tab=B 2. You can still use the F series hacks. 3. You already found it. Quote Link to post Share on other sites
orangesuburban Posted November 3, 2009 Author Report Share Posted November 3, 2009 Great, thank you! and one other mac comment, i had no problem doing the set up and everything via the mac, however once the update was done my mac would no longer recognize the SD card, it wouldnt even let me reformat the card. however, my nikon D60 would let me reformat the card... its odd, but it works. Quote Link to post Share on other sites
orangesuburban Posted November 3, 2009 Author Report Share Posted November 3, 2009 i did the update to 3.01 and now the "system startup in progress. please wait." message does not go away and the unit will restart itsself every few minutes. what did i do wrong and how do i fix? thanks again. Quote Link to post Share on other sites
crilleym Posted November 3, 2009 Report Share Posted November 3, 2009 i did the update to 3.01 and now the "system startup in progress. please wait." message does not go away and the unit will restart itsself every few minutes. what did i do wrong and how do i fix? thanks again. Sounds like something went wrong. You may want to try it again. Did your unit work with 3.0 before upgrading to 3.01? Did you backup your unit first? Did you already apply some mods after 3.0? Quote Link to post Share on other sites
orangesuburban Posted November 3, 2009 Author Report Share Posted November 3, 2009 worked fine with 3.0 no no so i need to reinstall 3.0 and do everything over? edit: tried to reinstall 3.0 and now i get the boot screen and then the black screen, cant get the unit to go into test mode. Quote Link to post Share on other sites
crilleym Posted November 3, 2009 Report Share Posted November 3, 2009 worked fine with 3.0no no so i need to reinstall 3.0 and do everything over? edit: tried to reinstall 3.0 and now i get the boot screen and then the black screen, cant get the unit to go into test mode. You did not make a backup?? Not good. If you can somehow get back into testmode, you can delete myflashdisk (nothing else) and recopy the entire x910 flashdisk. Reformat your SD card and recopy testmode 2.3. Here is the file... testmode.zip Quote Link to post Share on other sites
orangesuburban Posted November 3, 2009 Author Report Share Posted November 3, 2009 i found a f90bt backup on the forums so i have it now, but cant get into test mode to use it. off to try your version of test mode. thanks. Quote Link to post Share on other sites
orangesuburban Posted November 3, 2009 Author Report Share Posted November 3, 2009 well, your version of testmode worked and i got in. my flash disk is copying over now.... Quote Link to post Share on other sites
orangesuburban Posted November 3, 2009 Author Report Share Posted November 3, 2009 got the unit running 3.0 thank you! now, should i retry 3.01 or not... hmm. Quote Link to post Share on other sites
orangesuburban Posted November 3, 2009 Author Report Share Posted November 3, 2009 same issue when updating to 3.01 "start up in progress. please wait." does not go away. so looks like ill put 3.0 on for a final time and keep it there. thanks for all the help. Quote Link to post Share on other sites
crilleym Posted November 3, 2009 Report Share Posted November 3, 2009 same issue when updating to 3.01 "start up in progress. please wait." does not go away. so looks like ill put 3.0 on for a final time and keep it there. thanks for all the help. No problem. But I think I know the problem. You are using F90bt backup and you are trying to install x910 3.01 firmware. You have to use x910 flashdisk and x910 firmware together. Quote Link to post Share on other sites
orangesuburban Posted November 4, 2009 Author Report Share Posted November 4, 2009 no, i have a f90 backup, now. but all the files i am using for the update are from the post i linked to in the first line of the original post. i do believe i am using all X info for the update. got my unit back to 3.0 and it will stay there until i update it with someone elses software i guess. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.