Anybody using a Bypass Module on the Z1?

[trayloc]

Hello (My first post) I currently have a Z1 with the Bypass Module connected and it works fine, no turning lights off/on etc... I can watch movie and drive all my Navi buttons works. Now here's the problem I upgraded the hard drive to the Z3 HDD and now my Bypass Module doesn't work, I was told it only works on the Z1. My questions is, has anyone figured out how to get the Bypass Module to work with the Z3? I apologize if this has already been covered.

[garrettoomey]

Read the locked stick post at the top of this forum. Updated Bypass Instructions for Z1, Z2, and Z3...

[trayloc]

The Locked Stick Post didn't cover what I was looking for, maybe I didn't explain it right. Let me try again. I have a Bypass Module I didn't actually see it but I was told it was a box you connect to your unit (Z1) and you will be able to drive and watch DVD's and all your Navi functions will work while your drive, which is true I can do all of this. Now I have upgraded to the Z3 HDD and now this box (Bypass Module) doesn't work, when I took it back to the installer he said it only works on the Z1. So I was trying to find out if anyone was using this box and got it to work on the Z3 and if so how. Thanks

[garrettoomey]

Reread the post (and link):

http://www.sminntech.com/z1flash.html#newbypass

Your "module" will no longer work. You will need to use the '2 wire bypass' if you want full functionality again.

 

This is very common around these parts

[trayloc]

Ok Thanks