vbtruk Posted May 2, 2010 Report Share Posted May 2, 2010 Hi my US model is working with the R17 maps and the v3 update but do i need to change the sys.txt file? i have read the threads but i am unsure exactly which part i need to change in it? someone said to change the file back to UC can you please tell me what this means? thanks. Quote Link to post Share on other sites
34by151 Posted May 16, 2010 Report Share Posted May 16, 2010 type="PIONEER746EW" ;(AU) F700, F900, F90 type="PIONEER746EW" ;(EU) F700, F900, F90 type="PIONEER746UC" ;(US) F700, F900, F90 type="PIONEER749EW" ;(AU) F500 type="PIONEER749EW" ;(EU) F500 type="PIONEER749UC" ;(US) F500 So For a US F900 you will have [device] type="PIONEER746UC" Cheers 34by151 Quote Link to post Share on other sites
makcay Posted May 29, 2010 Report Share Posted May 29, 2010 HELP HELP HELP!!!!!!!!!!!!!!!!!!!!!!i just brought a f90bt us model off ebay, alhough i cannot get it to boot to windows so i can put the aus maps on. i followed the instruction in the 1st page in the oz update thread, first i got the firmware Https://www.pioneer.com.au/avicf900btDownload.aspx and installed this to my avic from my sd it worked fine. next i put the files i extracted from http://www.4shared.com/file/95580165/5b ... part1.html http://www.4shared.com/file/95583929/2a ... part2.html http://www.4shared.com/file/95577170/2d ... part3.html it gave me the 5 files mitacap,backup, testmode, readme, update. i put these on my sd card. i put it in the sd slot, turn the car on and it just keeps going in to the main screen and doing nothing, i tried several times, and didnt work. then i restored my avic back 2 original factory settings hoping maybe that was a problem, and tryed to boot with the sd card and it just went straight to the main screen again. i have no clue as to what im doing wrong. is all i want my system to do is function with the gps music and all other standard features. could somebody body please tell me what i am doing wrong? or if any1 has enough time maybe a detailed message on how to get the system functioning correctly like as if i purchased it from a shop in au. thankyou guys any help is much appreciated!! Jarryd, i had the same issue where i could not load testmode when i first got the unit. make sure you have the latest testmode as i found the one wit mitacap didnt work for me either. hope this helps. thanks, Quote Link to post Share on other sites
34by151 Posted May 31, 2010 Report Share Posted May 31, 2010 The one with the mitacap older is for the V2 firmware. If you have the v3 firmware you will need to use testmode v3 cheers 34by151 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.