Z110BT Mic does not work.

[Buddy]

no. What is that? and what does it do,

[Morfious]

It's an electrical tool that allows you to measure current, in real time, traveling through a wire.

 

I have heard that you can tie into the rear wiper switch (?!?) which will control the dimmer/illumination wire. This is a brown wire with a white stripe.

 

image courtesoy of ss-shoutout.com

[stoveken]

the trailblazer depending on the year may not have a light wire at the radio harness. it may be done thru can bus data. hook the pioneer ill. wire to the ash tray light wire, or a lighted switch near the radio. that will dim it when the auto lights come on or when you turn them on yourself. jim

[CaptainInsaneO]

the trailblazer depending on the year may not have a light wire at the radio harness. it may be done thru can bus data. hook the pioneer ill. wire to the ash tray light wire, or a lighted switch near the radio. that will dim it when the auto lights come on or when you turn them on yourself. jim

 

Quoted for truth. This is the route I will probably take with my 4Runner since the dash clock dims when the headlights are on. This is good advice, that wiper switch tip freaks me out.

[Buddy]

ok. Got it to work just fine. Its the Brown/White stripe wire in the wiper harness. Works like a champ. Just waiting for the replacement mic and I can close up the dash. Still cant get the thing to sync with my ipod yet. Look into that next. Thanks all for your help and input.