dodgeintrenton Posted December 13, 2006 Report Share Posted December 13, 2006 I've had the unit for a while...worked fine until one night it never switched into nighttime display.....double checked the menu option...that was fine....messed with my headlight switch...nothing....the option is displaying nighttime but its in day display...any ideas. Quote Link to post Share on other sites
cntrylvr79 Posted December 14, 2006 Report Share Posted December 14, 2006 Check the illumination wire. It might have come disconnected. What kind of car is it in? Quote Link to post Share on other sites
madmanfrommars Posted December 14, 2006 Report Share Posted December 14, 2006 Mine never switches between day/night mode at all, I'm probably going to bring it back to the place where I got it installed and have them look at it. Quote Link to post Share on other sites
dodgeintrenton Posted December 15, 2006 Author Report Share Posted December 15, 2006 It's in a dodge durango. Self installed. The wires are all properly installed and intact along with the connections. It seems like that end is working fine, seeing as how I can manually change the display menu to nighttime but it only stays in daytime mode visually.Sorry....confusing Quote Link to post Share on other sites
cntrylvr79 Posted December 15, 2006 Report Share Posted December 15, 2006 What year is the durango? Is the illumination wire from the avic hooked up to the orange or the orange/white wire of the harness? Quote Link to post Share on other sites
dodgeintrenton Posted December 16, 2006 Author Report Share Posted December 16, 2006 It is an 01 slt with the infinity system. I have double and triple checked my connections...like I said I checked the menu option where you can manually change the display to night or day but it wont change....I even went into the menu with the brightness contrast etc.... it's sensing the darkness properly just not changing......wtf....its been fine for months Quote Link to post Share on other sites
cntrylvr79 Posted December 16, 2006 Report Share Posted December 16, 2006 Ok so where is the illumination wire of the z1 hooked up to? Quote Link to post Share on other sites
free_refil Posted December 28, 2006 Report Share Posted December 28, 2006 Go to the connections screen and see if the voltage is changing for illumination when you turn on and off your headlights. If it is not, check your wiring. If it is, hold down the WIDE button to go to the screen display settings and check there... If none of those settings fix ya up, try a reset... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.