onixxf Posted May 26, 2010 Report Share Posted May 26, 2010 Friends, I broke the mic input jack on my f700bt. No matter what I do I can’t get it to pick up the mic for voice transmission. Any quick fix for this without sending it back to Pioneer? I did a stupid thing to cause this problem so if I have to pay for it then I will but send me all your advice first… Quote Link to post Share on other sites
josieless Posted May 26, 2010 Report Share Posted May 26, 2010 You physically broke it? Or you shorted something out and now it just wont pic up sound through the jack? What is the nature of the "stupid" thing you did to cause the problem? Quote Link to post Share on other sites
VBLUE42 Posted May 26, 2010 Report Share Posted May 26, 2010 Sense your out of warranty it may be advantageous to try to fix this yourself. If the female mic port is broken you may be able to purchase a new one at Radio Shack. A simple solder job should remedy this. Other wise a trip to Pioneer service is going to be required at your expense. Quote Link to post Share on other sites
onixxf Posted May 27, 2010 Author Report Share Posted May 27, 2010 You physically broke it? Or you shorted something out and now it just wont pic up sound through the jack? What is the nature of the "stupid" thing you did to cause the problem? First of all I used a reducer so I could make use of a 2.5 pin; this made the male pen about two inches long. I Pulled the unit out without disconnecting the reducer from the mic input; tension on that long extension caused the crack in the jack housing. I should have disconnected everything completely. Quote Link to post Share on other sites
josieless Posted June 1, 2010 Report Share Posted June 1, 2010 Ouch. I have no other suggestion then trying to fix it yourself with a new jack form radio shack or similar store. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.