Stigy Posted June 3, 2010 Report Share Posted June 3, 2010 So i took out my radio to install a new A/C unit in my car and try and clean up the cables back there. I have two boxes on the IP-BUS (Bluetooth and XM). After putting everything back together I have NO audio over either box connected over the IP-BUS. I have audio over iPod, FM/AM and Navi/DVD. The IP-BUS cables go from the D3 > Bluetooth IP-BUS IN. And then Bluetooth IP-BUS OUT > XM IP-BUS IN. FYI it worked correctly before I went in there to "clean up" the wires. Any idea what I should be looking for when I take it apart this weekend or if my setup is not correct? Quote Link to post Share on other sites
valkur Posted June 3, 2010 Report Share Posted June 3, 2010 This happened to me too, I had the IP bus cable plugged into the wrong port on the XM module. Switched it over, instant fix. Quote Link to post Share on other sites
thedak1 Posted June 14, 2010 Report Share Posted June 14, 2010 Yep. As stated above. You probably got your cables plugged in backwards. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.