Tiger1 Posted June 23, 2010 Report Share Posted June 23, 2010 Just finished hooking up the OEM camera to the Z110BT. Took me 5 hours but most of that was education unwanted, also had to join TIS for wiring/connector help. The Venza has a multifunction display (TFT) up front that the camera is connected to. You just need to splice into 3 wires, 2 for the camera and 1 for the reverse signal. The connector at back of TFT is F1. #14 = Red to Vid + (pin on the rca) #15 = White to Vid - (shield on rca) #2 = Gray to purple/white pioneer harness. P.S. I tried to use pinouts and wire colors from a post in the Tundra forum, but they were different from the Venza. Quote Link to post Share on other sites
rrolff Posted June 24, 2010 Report Share Posted June 24, 2010 Just finished hooking up the OEM camera to the Z110BT. Took me 5 hours but most of that was education unwanted, also had to join TIS for wiring/connector help. The Venza has a multifunction display (TFT) up front that the camera is connected to. You just need to splice into 3 wires, 2 for the camera and 1 for the reverse signal. The connector at back of TFT is F1. #14 = Red to Vid + (pin on the rca) #15 = White to Vid - (shield on rca) #2 = Gray to purple/white pioneer harness. P.S. I tried to use pinouts and wire colors from a post in the Tundra forum, but they were different from the Venza. Post some pics if you can! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.