
rrolff
Members-
Content Count
136 -
Joined
-
Last visited
About rrolff
-
Rank
Member
-
I've tested more than my share of boosters in the past. To a one, they boost everything - which means the noise gets boosted too (in other words - they do not work).
-
I have the z130bt in one car, z140bh in another, and...
rrolff replied to troydavies's topic in General
Can you confirm the search by POI was removed - that sounds silly - it's one of the only things I use for nav... -
It's not the mic - it's the Pioneer Z1x0 (haven't heard if the Z140 fixes it). You can get a better mic - but no one to my knowledge has shown any marked improvement.... I've got a Z110 (updated to Z130), and a Z130 - both are identical in call quality (sucks).
-
That's just the way it works... HD radio does not show presets. Also, Sirrius doesn't either (but XM does) - kinda lame that Pioneer didn't fix this - it seems trivial...
-
There's a guy selling harnesses on EBay for $40. take it to a local stereo shop, and they'll move the pin for a few $$
-
Just an FYI - the pin is really a bitch to move... I broke it in the process of moving it (thankfully a local EBayer sells the harness for $40). Called a local car stereo shop, best $10 I've spent they did it in like 60 seconds...
-
Just installed a new Z130BT in my wife's car - I get the same issues as I do with my Z110 (which has been software updated to Z130) - lots o background noise...
-
I suggest reading the whole bluetooth mic thread here: http://avic411.com/index.php?/topic/29433-bt-mic-issues-for-bt-calls-asking-for-a-sticky/ You're fighting a losing battle.........
-
"Tuner error" after updating to Z130 (due to MSN tuner)
rrolff replied to rrolff's topic in Hacks/Mods
That's not the point - the point is - instead of just disabling the MSN, they've disabled the whole radio after install... So if you do the upgrade, you've gotta pull your radio out of the car, remove the MSN hardware, then re-install.... It's an undocumented stupid hassle.... -
Interestingly, we bought a Z130 (I already have a Z110 - upgraded to Z130), and bought a traffic tuner for the Z130 - as it turns out, the Z130 comes with the tuner - so now I have an extra (to put in my car )...
-
Does anyone have a picture of the connector you move? I broke mine, and couldn't pull that one out - so I need a new pin. While I have a million different pins at work - I need to know what it looks like to grab a smattering of em... TIA...
-
Bump - has anyone actually installed the traffic tuner???
-
I had to dig for an explanation - so instead of leaving the topic buried, thought I'd throw out a new one to cover this. If you have the MSN tuner, and do the Z130 upgrade, you will end up with an annoying, slightly unusable HU... After the update, if you have not pulled your HU out, and unplugged the MSN (i you have it), you will get a " tuner error - if this persists, contact Pioneer". Everything still works, and you can use the nav/radio et al - you just have to press "OK" every few seconds (hassle) when trying to use the touch interface. Funny that they would not have thou
-
Haven't seen any clear reviews of the traffic tuner... I thought the MSN was pretty useless, didn't update the traffic too often, and generally gave inconsistent results... Anyone play with the new tuner???