gl35 Posted December 7, 2010 Report Share Posted December 7, 2010 So I just installed the Pioneer AVIC X920BT in my 2007 Infiti G35 Coupe. I am really having a tough time trying to find out where the Purple Reverse Gear Signal Input Wire attaches to the car. I understand the principle, but have not had any luck after a day and a half of searching the internet and poking around the car... I am stumped. I heard something about a purple wire in the kick panel on the drivers side... but that wire did not produce 12v when I put the volt meter on it, and started the car and put it in reverse. So if anyone has a G35 with an AVIC x920bt and a back up camera, and or just knows which wire to connect, I would very much greatly appreciate it. BTW I bought a Boyo VTL375 license plate camera, if that matters. Thanks in advance- Quote Link to post Share on other sites
1loudls Posted December 7, 2010 Report Share Posted December 7, 2010 when all else fails, there will always be a reverse wire at the reverse light in the back of the car (usually near where the camera is going anyways) so why not just tap into that one and run the wire up with the rest of the wires for the camera? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.