shaft412412 Posted February 6, 2011 Report Share Posted February 6, 2011 I have the f90 with xm radio. Every time i turn off my car (2003 yukon denali)my xm radio starts changing the channels on the screen. the actually sounds is still from my last channel. this gets very annoying becuase when i start my car it is always on a station i didnt leave it on or on the 01 channel. it doesnt matter if i have presents for channel or leaving them all blank. Quote Link to post Share on other sites
burnurass Posted March 28, 2011 Report Share Posted March 28, 2011 Bump. I have this same exact issue, anyone else? Quote Link to post Share on other sites
JasonH Posted March 28, 2011 Report Share Posted March 28, 2011 It will reset to channel 1 if the tuner isn't connected to constant power. Quote Link to post Share on other sites
Harvey_Gordon Posted March 29, 2011 Report Share Posted March 29, 2011 Do you have steering wheel controls? This can cause this same problem if the power cuts from the controls before the radio dies. Here's one solution for you. Not the best, but it works. If you have a bank of presets you don't really use (I only use the first 6 on bank one, not the others on bank 2 or 3), then set the presets all to your favorite station on a bank you're not using. Then when the radio does the annoying beep, beep, beep thing, it's still on your station. When you want to change stations otherwise, use the steering wheel control to change bank, then stations. Annoying, but it'll work. The radio needs the signal from the steering wheel control (probably a pac-swi something), or it will change on you, It is a wiring/key/power issue, but sorry, I don't have the answer. I do hope this helps though. Good luck. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.