MSmith Posted February 14, 2011 Report Share Posted February 14, 2011 After 10 months of smooth operation, out of nowhere my Sirius stops working in my AVIC-X910BT. The rest of the system works totally fine, however when I go to Sirius, no sound is produced and I can't change the station. It's not the signal because it would say "Acquiring Signal" if the antenna was the issue, but it doesn't. The Sirius boxes are recognized, otherwise it would say "No Device Found" which it doesn't. This problem has been posted by others and the solution was always, disconnect the Sirius Box for 5 minutes, or pull the fuse of the car stereo for 5 minutes and it fixed it for everyone. Didn't fix it for me though. I disconnected the SCC1 box for hours and nothing. So then I pulled the fuse for the radio and left it out over night, but still the issue persists. Advice? Should I reload software? Any idea if it's the radio or the Sirius boxes? Thanks Quote Link to post Share on other sites
MSmith Posted February 15, 2011 Author Report Share Posted February 15, 2011 Ok, got it. Turns out you have to unplug the CD-SB10, not just the SC-C1. Funny that pulling the fuse didn't do it. Anyways, left both Sirius boxes unplugged overnight and all is good now. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.