cpkdude Posted March 14, 2011 Report Share Posted March 14, 2011 when encoding, re-encoding, converting etc, from whatever format to xvid for the Pioneer's SD card slot, what do people find is the best resolution to use? There are many combinations. Should it always be a 1:88 ratio if you're going to leave the screen in "normal" mode all the time (preferred - why keep switching back and forth). I'd like to find the right combination between resolution, FPS and bitrate so when I do a conversion, I'll be able to count on it filling the screen without squishing the screen or letterboxing. Of course, I understand some fiddling would be needed depending on how the original file was packaged. For now, lets just take a factory, 16x9 dvd rip as an example. 480x272 seems to work, as far as filling the screen goes, which is 1.765 - does that sound right? Quote Link to post Share on other sites
rgarjr Posted March 14, 2011 Report Share Posted March 14, 2011 I like encoding my vids to 640X360. Quote Link to post Share on other sites
cpkdude Posted March 14, 2011 Author Report Share Posted March 14, 2011 I like encoding my vids to 640X360. thanks - I'll give that a whirl Quote Link to post Share on other sites
cpkdude Posted March 16, 2011 Author Report Share Posted March 16, 2011 OK, that's a good resolution for this screen size. That way I don't have to muck with the normal or full setting - just leave it in normal. bitrate of 768 with audio conversions at 160 and I've been able to play every video converted to xvid.avi without a hitch - feature length films, videos, whatever. All from a tiny, 8 gig Micro SD. Nice. Quote Link to post Share on other sites
arizzle Posted June 14, 2011 Report Share Posted June 14, 2011 OK, that's a good resolution for this screen size. That way I don't have to muck with the normal or full setting - just leave it in normal. bitrate of 768 with audio conversions at 160 and I've been able to play every video converted to xvid.avi without a hitch - feature length films, videos, whatever. All from a tiny, 8 gig Micro SD. Nice. What program are you using to encode? Quote Link to post Share on other sites
theycallmeruffi Posted June 16, 2011 Report Share Posted June 16, 2011 What program are you using to encode? I use Xilisoft. Quote Link to post Share on other sites
cpkdude Posted June 20, 2011 Author Report Share Posted June 20, 2011 AVS Video Convertor or Handbrake both work well Quote Link to post Share on other sites
Kurto2021 Posted July 1, 2011 Report Share Posted July 1, 2011 I have solved all of this with my unit....I should have made a video of what I did. I have a WDTV that I disassembled and soldered in a connection to directly wire it to the cars power supply. It's a 12v power cord so no need to do anything with the power just tapped right into the decks power line. I then cut off the IR sensor from the board and soldered some wires to the connection points on the board then soldered the wires to the removed IR sensor. Installed the WDTV on top of the deck behind the dash with some double stick tape ran the wires out the front and mounted the IR sensor on the dash. Ending result is I can play MKV, AVI, WMV and pretty much any other video I want by connecting the usb port that I ran to the glove box. I can also grab video from Youtube and a few other sources when I use my phone as a hotspot Quote Link to post Share on other sites
maddmaxx666 Posted August 31, 2012 Report Share Posted August 31, 2012 I have 2 wdtv's how hard was it to do? Thinking about taking my wd apart tonight lol, just a wifi stick in the usb port of the wd, and my iphone as a hotspot. I also have a bluetooth candyboard handheld keyboard that works on the wd with a dongle.... lol talk about distracted driving! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.