gdenuf4atruck Posted June 28, 2011 Report Share Posted June 28, 2011 I would like to move my Z110BT from my F350 to my '02 Silverado before I sell the F350. The dash area where the existing radio in the Silverado is installed is canted towards the driver more than the recommended 5 degrees. The manual says "Install the navigation unit horizontally on a surface within 0 degrees to 30 degrees tolerance (within 5 degrees to the left or right). Improper installation of the unit with the surface tilted more than these tolerances increases the potential for errors in the location display, and might otherwise cause reduced display performance." This seems to refer to the 30 degree pitch rather than the 5 degree left and right. So my questions are: 1) How much does this left angle affect the performance. 2) Has anyone installed this unit in a Silverado with the angle matching the original radio? I am aware there are double din versus the Silverado's din and an half issues but I think I can solve these. Thanks for any help anyone can provide. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.