vinny g Posted February 10, 2007 Report Share Posted February 10, 2007 I recently purchased an N3 which will be going in my 07 vette.Does anyone make a wiring harness that makes this install easier?And does anyone know of a good installer in Orange County? Thanks Quote Link to post Share on other sites
JasonH Posted February 10, 2007 Report Share Posted February 10, 2007 I'm a bit curious as to why you are putting an N3 in a Corvette. The C5's and C6's have double din openings to fit a Z1 or D1/2/3. There are wiring harnesses available, but I don't know of them off hand. If you have a Bose system, the install will be a little tricky. There is a full writeup on the D1 here: http://forums.corvetteforum.com/showthr ... ?t=1518095 Quote Link to post Share on other sites
aznsmartass24 Posted February 11, 2007 Report Share Posted February 11, 2007 Doesn't the C5 have a 1.5 din opening? You need to get a custom dash bezel to make it double din. Costs around 300 to make, or considerably cheaper if you make it yourself. Quote Link to post Share on other sites
whtcrxghst Posted February 11, 2007 Report Share Posted February 11, 2007 He said 2007 Quote Link to post Share on other sites
cntrylvr79 Posted February 11, 2007 Report Share Posted February 11, 2007 Then there's the obvious. The pic that jason posted is of the dash of a c6. Nice over sized double din. Quote Link to post Share on other sites
aznsmartass24 Posted February 12, 2007 Report Share Posted February 12, 2007 I am referring to JasonH's comment about the C5 and C6 both having double dins. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.