hutlet10 Posted March 19, 2013 Report Share Posted March 19, 2013 Hello I was wondering if anyone can give me some advice, I have a avic 930 and I removed the security control or whatever it is called on the lower left corner of the deck one day and now when I place the part back in I get no power to the system, I have check all the fuse's three in the truck and the one on the back of the deck. I am getting power to the harness as I have plugged the original stereo back in to the truck to make sure power was getting there. I am not sure what I should try next any help appreciated, I;m thinking the deck has a three year warranty and I have had it for 2 so if nothing I guess i can return it. Quote Link to post Share on other sites
cltgt Posted March 20, 2013 Report Share Posted March 20, 2013 It sounds like a contact is not connecting. I have never taken mine, so I do not know what it looks like. Re-seating it again is not helping? Quote Link to post Share on other sites
hutlet10 Posted March 21, 2013 Author Report Share Posted March 21, 2013 I have unplugged all the cables to the deck and have re-installed them, I haven't tried replacing the fuse yet I will when I get time, I was wondering is there a hard reset on the deck at all? Like I said there is power getting to the deck as I replaced with the original and it powers on. I have a cd in the deck that I would like to get back also and its impossible without power... I have tried contacting pioneer via e-mail twice and nothing back I will have to give them a call see what warranty there is. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.