bryancx94 Posted March 28, 2007 Report Share Posted March 28, 2007 Here is the issue. Took my avic-n2 over to a friends to get soldered, he melted the pins off, and now I have an oval wax scab where the pins use to be. The Avic still works, question is this: I took the unit apart, it does not seem that those pins went all the way through the circuit board. Does anyone know if you can solder a connection on the top of the board to complete the bypass? I am thinking I am pretty much SOL, and will have to now operate the unit the "legal" way. After much reading I understand that I could put a toggle on the GPS antenna and ground the parking brake wire if I wanted to watch a DVD/TV while driving, but that seems like a pain and that function is not that appealing to me anyway. The big issue was the lockout over 12MPH to re-route the GPS. Well any suggestions will be appreciated. I should have just soldered it myself, live and learn :/ P.S. - The Stock Avic still rocks anyway! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.