Jump to content
AVIC411.com

Archived

This topic is now archived and is closed to further replies.

JasonH

D3 Bypass Flash Tutorial

Recommended Posts

Thanks for hosting it Jason. If anyone finds this tutorial helpful, please use my referral code: pe7ar-538s2-w5387

 

The last part of the gallery shows the Parking Brake wire and the Ground wire.

 

You can use the wire tap that is already on the parking brake wire to tap into the ground wire shown. You could also use a tap to connect the Mute wire to the ground wire.

 

I have confirmed this and you only have to use that one wire to ground. I tapped into the ground on the wiring harness in case I ever need to change the other harness (if I get that new truck I'm eyeing).

Share this post


Link to post
Share on other sites

The pin on the mute wire has a flat side and a side that has a gap in it. The gap goes on the inside and the flat side goes towards the outside (where the plastic clip is).

 

Take a look at the pictures again to see what I mean. Push the mute wire in all the way, then try and pull it out. If it comes out, it's not in all the way.

Share this post


Link to post
Share on other sites
I just did the bypass for my d3 and the video stops after 15 mph what did I do wrong?

 

you didnt listen to cntrylvr79

Share this post


Link to post
Share on other sites

×