mykal41 Posted April 17, 2007 Report Share Posted April 17, 2007 I used the can bus adapter to install my d3. Do you guys use that ground or ground the radio to something better. Quote Link to post Share on other sites
scrupul0us Posted April 17, 2007 Report Share Posted April 17, 2007 i used the ground on my stock harness Quote Link to post Share on other sites
necro Posted April 17, 2007 Report Share Posted April 17, 2007 If there is a ground wire on your harness, you could use that just fine. You could also find something metal to screw the ground spade connector to. Quote Link to post Share on other sites
scrupul0us Posted April 17, 2007 Report Share Posted April 17, 2007 You could also find something metal to screw the ground spade connector to. make sure to remove any paint/clear off the metal u are attaching it to... if it doesnt touch bare metal you will have a crappy ground Quote Link to post Share on other sites
necro Posted April 17, 2007 Report Share Posted April 17, 2007 Thanks scrupul0us. There shouldn't be much (if any) paint back there. But if there is, scrape it off! You want full metal on metal contact. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.