Hyperite Posted May 6, 2007 Report Share Posted May 6, 2007 I pulled my drive, unlocked it (thanks DucatiBoy!), and imaged it. Restored the image to a Hitachi 30GB laptop drive, put it in the car and ran the bluetooth update. Pulled the drive and imaged it. BIG thanks to titos and ltl2007 for the Z2 image (and the accidental raptor image? ). I restored that to the drive and put it in the unit. It ran two updates to the firmware successfully, and eventually acquired the correct location. I don't have my parking brake hooked up so I couldn't play too much, and after about 10 minutes it rebooted and gave the Can't-Find-The-Hard-Drive error message. I haven't had a chance to play with the files themselves yet, but anybody who needs specific files from any of the images, let me know and I'll send you a PM with a link. I feel like we're closing in on this one! Quote Link to post Share on other sites
MPS Posted May 6, 2007 Report Share Posted May 6, 2007 i want Z2 image please Quote Link to post Share on other sites
HenryJ Posted May 6, 2007 Report Share Posted May 6, 2007 Hyperite...there is a HDD that I've been using it is not an automotive HDD but I've logged thousands of miles and many hours on this one and it has worked very well. It may not work well in extreme conditions temp. vibration etc. but it has not failed me yet. It is a toshiba 4032 GAX. $44.95 at Chief Value online. Quote Link to post Share on other sites
Hyperite Posted May 6, 2007 Author Report Share Posted May 6, 2007 i want Z2 image please Didn't you post that you already have a Z2...? and that you had "the file" needed to replace for the interlock to be removed? Quote Link to post Share on other sites
ltl2007 Posted May 6, 2007 Report Share Posted May 6, 2007 ive been trying to FTP out the Z2 image i have, but at 17GB it takes almost a week. if anybody wants one i can burn them to DVD and mail them. Quote Link to post Share on other sites
cntrylvr79 Posted May 6, 2007 Report Share Posted May 6, 2007 i want Z2 image please Didn't you post that you already have a Z2...? and that you had "the file" needed to replace for the interlock to be removed? According to this thread you would be correct. http://avic411.com/forum/viewtopic.php? ... highlight= Quote Link to post Share on other sites
Hyperite Posted May 6, 2007 Author Report Share Posted May 6, 2007 ive been trying to FTP out the Z2 image i have, but at 17GB it takes almost a week. if anybody wants one i can burn them to DVD and mail them. DVD-DL only holds 8 gigs anyway... but what files did you need from the Pre-BT image? I'll upload them... Quote Link to post Share on other sites
MPS Posted May 6, 2007 Report Share Posted May 6, 2007 please i wold love a copy ive been trying to FTP out the Z2 image i have, but at 17GB it takes almost a week. if anybody wants one i can burn them to DVD and mail them. Quote Link to post Share on other sites
ltl2007 Posted May 6, 2007 Report Share Posted May 6, 2007 hyperite, i need the files in the SDATA/PRG0/APL and PRG1/APL folders. from what i have seen in the DLL's our mods probably need to go in there. I need to compare them. Quote Link to post Share on other sites
Hyperite Posted May 6, 2007 Author Report Share Posted May 6, 2007 ltl, sent you a PM w/ the location (same FTP as last time). I think we're on the same page as to how we're going about this. I know you've got some things in mind to check on, but if you're interested in the path I'm taking, I'd steer you towards PRG1\APL\Navi.exe, as it is the only file that has a size change with the bluetooth update, and replacing it on the updated Z1 with the file from the non-BTupdated version allows for the flasher unlock But I'll save you some time... putting it on the Z2 has no effect. Quote Link to post Share on other sites
Hyperite Posted May 6, 2007 Author Report Share Posted May 6, 2007 OK, change from what I said earlier. The Navi.exe is a different size, but that actually isn't the trigger for the bypass. Seems it searches for a 0 byte file in the SDATA root called PRG.FLG which seems to be a flag of some sort. Using a bluetooth updated Z1 and removing that file yields a flash-bypassable Z1 instead of pin-grounded-bypassable. Innnnnteresting. And there is no PRG.FLG file on the Z2. Quote Link to post Share on other sites
MPS Posted May 7, 2007 Report Share Posted May 7, 2007 can some plz post Z2 image please Quote Link to post Share on other sites
Hyperite Posted May 7, 2007 Author Report Share Posted May 7, 2007 can some plz post Z2 image please Scroll up and answer my question, but don't fill this thread with multiple posts begging for an image. Quote Link to post Share on other sites
MPS Posted May 7, 2007 Report Share Posted May 7, 2007 man never mind i can get 1 faster from Pioneer Quote Link to post Share on other sites
side4 Posted May 10, 2007 Report Share Posted May 10, 2007 can I please get a link to the images I have a Z2 to play with just and a locked drive thinking about switching the bottom circut board (same model) in hopes it will release the lock and allow a reformat and reinstalling the image back on . Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.