avicd1Z Posted June 18, 2007 Report Share Posted June 18, 2007 hi, my avic d1 face does not open after I press button open or angle. I do not hear the motor opening the face running. please help. thank you Quote Link to post Share on other sites
cntrylvr79 Posted June 18, 2007 Report Share Posted June 18, 2007 Remove the unit from the dash. Take off any brackets screwed into the sides of it. If it still won't eject then you have a problem with the unit. If it does eject then it's an installation issue. Quote Link to post Share on other sites
avicd1Z Posted June 18, 2007 Author Report Share Posted June 18, 2007 Remove the unit from the dash. Take off any brackets screwed into the sides of it. If it still won't eject then you have a problem with the unit. If it does eject then it's an installation issue. thanks. I just removed the units from the car and it opens. Quote Link to post Share on other sites
cntrylvr79 Posted June 18, 2007 Report Share Posted June 18, 2007 What kind of car is it? Quote Link to post Share on other sites
yinkoshaumer Posted June 27, 2007 Report Share Posted June 27, 2007 I had the same problem. I just hit the reset button and that fixed the problem Quote Link to post Share on other sites
g35john Posted July 27, 2007 Report Share Posted July 27, 2007 I have the exact same issue. Im not sure if its an intsllation issue cause i had the unit intsalled for almost 2 years now with no problems. All of a sudden the open and angle buttons dont respond. The first time it happend I had to turn off the car (kill the power) and turn it back on. It worked fine. This time however that fix no longer works. I cant open the face of the unit. Any one have any other ideas? Quote Link to post Share on other sites
iblowmindz Posted July 27, 2007 Report Share Posted July 27, 2007 mine does the same thing but it started when I did the ebrake mod. my screen will not open and my vehicle dynamics dont work anymore. both only work when truck has been sitting overnight and I just turn the key to the accessory position, I tried the reset button and it didnt work... any ideas?? Quote Link to post Share on other sites
mauri Posted July 27, 2007 Report Share Posted July 27, 2007 i had a buddy of mine with the same problem exept his motor got stuck took out the unit the brackets tried to reset nothing grabbed a screwdriver taped the bottom of the radio with the screwdriver head where the motor sits and boom it opend right up give it a shot Quote Link to post Share on other sites
tj.brewster Posted August 2, 2007 Report Share Posted August 2, 2007 If you installed it with a certain kit (can't remember brand). The face plate has a lip on the inside that will catch the rail that it slides on. I had to remove the face plate and dremel a small groove for it to slide in. Took about 5 mins. Hope that helps. TJ Quote Link to post Share on other sites
cdaniel76 Posted August 28, 2007 Report Share Posted August 28, 2007 I've had this same problem with my D1 recently. It's been installed in my truck for almost two years without a problem. It's an intermittent problem though. Sometimes the reset button works, sometimes it doesn't. If the reset button doesn't work, I just leave it alone for a few days and for some reason it'll start working again... Weird... Anyone else have these issues or know of a resolution? Quote Link to post Share on other sites
fubardio Posted September 3, 2007 Report Share Posted September 3, 2007 Guys it's a temperature thing. Mine doesn't open if it's above 75F outside. I think it's a cold solder joint somewhere. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.