TScott Posted July 15, 2007 Report Share Posted July 15, 2007 I just received my double din install kit from Metra. A little disappointed....it's just a basic flat black finish and doesn't match the glossy black around temp controls. Has anyone done and install of a D3 in the '07 Tundra and how did it go with wiring and finding the VSS wires? Thanks Quote Link to post Share on other sites
shacall Posted July 15, 2007 Report Share Posted July 15, 2007 I just did it on my 07 Tundra. It was VERY easy. I used the toyota harness, which made things a bit easier. The VSS wire was very simple to find and easy to tap into. Let me know if you want me to send you the pdf via email, showing the vss wire. I've talked with Metra several times, and it doesn't sound like there are any near term plans to get the gloss black finish. There are a few pix on tundrasolutions.com of someone that painted theirs and it matches almost perfect. Quote Link to post Share on other sites
shacall Posted July 15, 2007 Report Share Posted July 15, 2007 Follow the link below. It has pictures of the VSS wire you need to tape into. http://www.tundrasolutions.com/forums/g ... nsor-wire/ Quote Link to post Share on other sites
TScott Posted July 15, 2007 Author Report Share Posted July 15, 2007 Shacall, Thanks for the info. Any chance you took install pics? I may go ahead and let an installer do the job. The instructions that came with the Metra kit aren't perfect and I'm afraid to go pulling on dash pieces that are supposed to slide out easily. Thanks Todd Quote Link to post Share on other sites
shacall Posted July 15, 2007 Report Share Posted July 15, 2007 Todd, You can see some pix here: http://www.flickr.com/photos/9472383@N08/?saved=1 I would do the job yourself. I'd be more than happy to send you instructions on how to rip the dash apart (pdf from Toyota). It really was a much easier job than I had anticipated. Let me know if you want some pdf's, and I'll send them to you. Gary Quote Link to post Share on other sites
TScott Posted July 15, 2007 Author Report Share Posted July 15, 2007 I pm'd you with my email address. Thanks Todd Quote Link to post Share on other sites
yamahatundrav8 Posted August 13, 2007 Report Share Posted August 13, 2007 Todd,You can see some pix here: http://www.flickr.com/photos/9472383@N08/?saved=1 I would do the job yourself. I'd be more than happy to send you instructions on how to rip the dash apart (pdf from Toyota). It really was a much easier job than I had anticipated. Let me know if you want some pdf's, and I'll send them to you. Gary I finally found you on the fourms Gary from Ts.This place is a great source of information. Erik aka Tundrav8georgia Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.