petku Posted February 1, 2015 Report Share Posted February 1, 2015 Hello all, I´m newbe here, but with service of electronic equipments I have lot of skills. AVIC-F700BT, which I´m trying get back to life is after amateur intervention. I exchanged damaged FPC connector on TFT board and FPC cable between TFT board and switch board. After that now I´m able switch unit to the service mode. BUT when I run WinCE update from SD, it start read from 0 to 100% and in this state it remain. Update WinCE will NOT start. Read lot of threads at this forum, but all solution without sucess. What I´m doing wrong ? Can I run test mode without previous WinCE update ? How to factory reset ? In service manual between Jig and Tools is info about service data disc GGV1322. Anybody have tested this tool ? Can it solve my problem ? Thank you for any idea. At this moment I´m lost. Regards Petku Quote Link to post Share on other sites
petku Posted February 6, 2015 Author Report Share Posted February 6, 2015 Can anybody help me with UBOOT upgrade ? Found on the net UBOOT for F900, but CRC error. Please help me with correct files UBOOT.bin and UBOOT.cks . Thank you very much for your time Regards ! Petku Quote Link to post Share on other sites
petku Posted February 11, 2015 Author Report Share Posted February 11, 2015 Can somebody confirm or help me, how to start Condi's HACKMODE via service mode ? Or how to write firmware on-board (W/O remove chip) from PC via programmer (JTAG). Thank you and regards. Petku Quote Link to post Share on other sites
guizmo Posted February 12, 2015 Report Share Posted February 12, 2015 Hi don't use condi's hackmode it's not good hack i give you a another program Quote Link to post Share on other sites
petku Posted February 12, 2015 Author Report Share Posted February 12, 2015 Hi guizmo, thank you for another program or solution. At this moment my AVIC is totaly death. After uboot upgrade it write uboot OK and restart itself. Now it can´t setup into service mode. I´m lost. Please need help, how to write FW into nand chip by external programmer. Quote Link to post Share on other sites
guizmo Posted February 12, 2015 Report Share Posted February 12, 2015 can you enter in blue screen? Quote Link to post Share on other sites
petku Posted February 12, 2015 Author Report Share Posted February 12, 2015 No, after yesterday uboot upgrade it wont set up to the service mode (blue screen). Any other idea ? Factory reset ? On the bottom right side of the navi board they are 2 tact switches. Anybody know, what to do with them ? Quote Link to post Share on other sites
guizmo Posted February 12, 2015 Report Share Posted February 12, 2015 https://drive.google.com/file/d/0B4MAukIOceEXYVNsOU5rN0V5YnM/view?usp=sharing it's wince for pioneer i don't now how to install him but it's all files for pioneer Quote Link to post Share on other sites
petku Posted February 12, 2015 Author Report Share Posted February 12, 2015 https://drive.google.com/file/d/0B4MAukIOceEXYVNsOU5rN0V5YnM/view?usp=sharing it's wince for pioneer i don't now how to install him but it's all files for pioneer Thank you for SW, but this unit is probably definitive death. Here can help only navi board exchange. Quote Link to post Share on other sites
guizmo Posted February 12, 2015 Report Share Posted February 12, 2015 if you can find another pioneer unit be the only solution Quote Link to post Share on other sites
petku Posted February 12, 2015 Author Report Share Posted February 12, 2015 if you can find another pioneer unit be the only solution You have right. Must check ebay, maybe I will get some for parts. Thank you and regards ! Quote Link to post Share on other sites
petku Posted March 25, 2015 Author Report Share Posted March 25, 2015 Finally I bought another stucked AVIC-F700BT. After WinCE update it working, but which firmware is the best for maximum performance and which maps are latest ? Found maps 2014 Q1, but I have not experiences with map update on Pioneer units.How to register new maps in the unit ? Thanks for any relevant info. Quote Link to post Share on other sites
guizmo Posted March 25, 2015 Report Share Posted March 25, 2015 Hi petku this topic talk about update and a new firmware http://avic411.com/index.php?/topic/39650-f700bt-f710bt-f900bt-f70bt-f90bt-2014-q1-eu-maps/page-2 Quote Link to post Share on other sites
petku Posted March 25, 2015 Author Report Share Posted March 25, 2015 Hi petku this topic talk about update and a new firmware http://avic411.com/index.php?/topic/39650-f700bt-f710bt-f900bt-f70bt-f90bt-2014-q1-eu-maps/page-2 Thank you very much for all your support. After few hour today I get it to working condition with new maps . Quote Link to post Share on other sites
petku Posted March 26, 2015 Author Report Share Posted March 26, 2015 Looking for czech voice files, that are stored in folder : My Flash Disk\APL2\iGo\Audio\CZE_F and CZE_M . Or anybody have Czech content backup ? Thank you once again. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.