CDSEVEN95 Posted September 15, 2007 Report Share Posted September 15, 2007 VSS worked for about two days. Now at idle it reads 35mph and goes up with revs. Connection directly to ECU. Moved to CC then cluster. I soldered the connection and used shielded cable first then went with non shielded to make sure it was not the wire. The speedometer works accurately in my car. My car has almost solid motor mounts so at idle I get heavy vibration. At idle in the hardware menu the d2 will say "excessive vibration". The unit is secure. Will this give me any issues now or in the future. Quote Link to post Share on other sites
CDSEVEN95 Posted September 18, 2007 Author Report Share Posted September 18, 2007 Quote Link to post Share on other sites
Two_Cold Posted September 18, 2007 Report Share Posted September 18, 2007 Please post the year/make/model of vehicle. Quote Link to post Share on other sites
whtcrxghst Posted September 18, 2007 Report Share Posted September 18, 2007 Are you sure you tapped the correct wire? Quote Link to post Share on other sites
CDSEVEN95 Posted September 18, 2007 Author Report Share Posted September 18, 2007 Please post the year/make/model of vehicle.1995 Honda accord lx Quote Link to post Share on other sites
CDSEVEN95 Posted September 18, 2007 Author Report Share Posted September 18, 2007 Are you sure you tapped the correct wire? yes ive got it at the ecu, cluster, and cc and I can cut the one to the gauge and I lose my speedometer and it was accurate for a while on the D2 Quote Link to post Share on other sites
Two_Cold Posted September 18, 2007 Report Share Posted September 18, 2007 There is no Speed Sense (VSS) wire listed for your car. I wouldn't hook the wire up at all. By connecting to other sources you might be getting currents that are not in the range your AVIC needs. Heavy Vibration?? This one I cannot think of a reason for. Quote Link to post Share on other sites
installermarc Posted September 18, 2007 Report Share Posted September 18, 2007 You may wany to relearn the vss on the avic. I think you go to connection status, then 3d hybrid and there should be a reset fields button, then drive around. As for your vibration, a 95 accord should not vibrate that much at all, even if you welded the motor mounts together. (although the last time I hot rodded anything with less than 8 cylinders, it was my lawn mower ) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.