upd 03.07.2011 update for 4.001000 version

1) fixed CommonLib.dll for MAP button or map icons, and no parking warning

2) fixed MainMenu.exe - only for power-up warning, via press MAP button after two seconds

(need fixed CommonLib.dll for work, delay in hex ms - can change at 0x4ABA4 offset)

3) fixed SystemSetting.exe - for Pioneer DEBUG MODE in System Information tabs

4) fixed Av.exe, Video.exe for parking camera warning

5) fixed Tel.exe - for disable switch to map when call

6) fixed ezrider.exe 8.3.2.188283, like as before.

AVIC_F900BT_4001000_fixpack1.rar

please, just for testing, for general using - please wait feedback.

upd 15.12.2009 update for 3.020200 version, UC or EW.

fixed CommonLib.dll for MAP button or map icons, and no parking warning

fixed MainMenu.exe - only for power-up warning, via press MAP button after two seconds

(need fixed CommonLib.dll for work)

fixed SystemSetting.exe - for Pioneer DEBUG MODE in System Information tabs

AVIC_F900 v322 nowarn.rar

upd 29.12.2010 update for 3.020200 version, UC or EW

with a new phone call - AVIC always switch to MAP screen.

i attach modified \My Flash Disk\APL\Tel.exe,

after his replacement, when an incoming call on AVIC remains an old window.

This is a test version, since I do not use the phone with AVIC. (please leave feedback about problems)

avic_f900_v322_Tel.exe_wo.map.rar (required to rewrite and restart)

old post:

my f90bt always show me error screen, so, i always need press OK twice.

i don't understand, how to disable both nag screen.

for first - i can edit speed setting in config file, but for second error - no any way at search.

so, i found 3 screen for navi warning at my avic

map

destination

setting->navi

but in avic software i just found and skipped only first two screen,

also my avic UC (US) version, so it can tested only at UC software.

guys, if anybody has time, please test. thanks.

293 MSG_14_00_00_01    NS_STR_MSG_14_00_00_01 System detected improper connection of Parking Brake lead. Please check your configuration for safety. Please see Operation Manual for more information regarding safe operation. 
513 MSG_13_02_01_02   NS_STR_MSG_13_02_01_02 This Navi product is intended solely as a driving aid. Review instruction manual and select route before driving. Navi is not a substitute for your attentiveness, judgment, and care while driving or moving your vehicle.  Always observe safe driving rules and driving laws, and follow road signs even if they contradict Navi's instructions.  By pressing OK key, you accept the license agreement in the instruction manual. 

--------------------------------

upd. i delete old file, and post new. please, test it. it better.

<!-- l --><a class="postlink-local" href="http://avic411.com/forum/download/file.php?id=7321">download/file.php?id=7321</a><!-- l -->

--------------------------------

upd 13.07.2009 update for 3.x version, UC or EW.

but power-up MAP warnind don't fixed. only like before.

CommonLib_v3b1.rar

upd 14.08.2009 update for 3.010100 version, UC or EW.

update from 13.07.2009 with power-up fix also, but at this moment, only for testing

...i delete this file, it not good solution.

i just tried and it and guess what, IT WORKS, anyone else want to confirm this?

Maybe I'm just dislexic but exactly which warning does this remove? I'm a little confused (like normal! haha!).

Maybe I'm just dislexic but exactly which warning does this remove?

the navi warning

Maybe I'm just dislexic but exactly which warning does this remove?

 

the navi warning

Sweet! As soon as I get home from work, I'll definitely have to try this out! Thanks carver!

eveyone might want to hold off for a while, couple things i've noticed

-pressing map hard button--->navi warning won't show up

-pressing destination menu--->navi warning won't show up

-pressing setting/navi settings--->navi warning still shows up

-pressing map on av screen--->navi warning will show up

-if unit was restarted and it was on the navi screen before restarting--->navi warning still shows up

the test i did was every boot up,

i thik we're one step closer,

thanks carver for this, hope you get the rest figured out

Carver, can you please explain how you managed to veiw the code in the mainmenu file?

did you have disassemble it or some thing?

Dave.

Carver, can you please explain how you managed to veiw the code in the mainmenu file?

did you have disassemble it or some thing?

 

Dave.

Yes,..do tell

-pressing map hard button--->navi warning won't show up

-pressing destination menu--->navi warning won't show up

This is because carver's nuked the messages from MainMenu.exe

-pressing setting/navi settings--->navi warning still shows up

That menu's in a different .exe. My bet is because the message is sent by SystemSettings.exe on that screen instead of MainMenu.exe.

-pressing map on av screen--->navi warning will show up

Again, different .exe (Av.exe). AV.exe sending the message instead of MainMenu.exe...?

-if unit was restarted and it was on the navi screen before restarting--->navi warning still shows up

SystemSettings.exe or Navi.exe, maybe?

carver, I'm willing to lend a hand in the effort if you can outline how you caught the messages coming from MainMenu.exe.

2 FourG, i naven't time for answer at this moment, and my english very very bad

but i find other way for fix navi warning, and i just go test is,

so, if anybody want test with me, please return original mainmenu.exe,

and repleace CommonLib.dll from this attachment.

avic_uc_v2_navi_warning_fix1.rar

sorry, at this moment i don't fix parking brake warning, i try it later, but need time,

or anybody can compare attachment with original file and try do it.

hey carver,

since i started the using the hacked exe i've experienced some random reboots, sometimes after a call the unit would just reboot, sometime when i have a route it just reboots, i think i'll just revert to the stock and live with pressing the OK

so, if anybody want test with me, please return original mainmenu.exe,

and repleace CommonLib.dll from this attachment.

Tests Run, PASS=no warning message, FAIL=still get warning message:

-pressing map hard button---> PASS

-pressing destination menu--->PASS

-pressing setting/navi settings--->PASS

-pressing map on av screen--->PASS

-if unit was restarted and it was on the navi screen before restarting--->FAIL

-if unit was restarted and it was on an AV screen before restarting, then press map on av screen--->PASS

-if unit was restarted and it was on an AV screen before restarting, then press map hard button--->PASS

Getting closer, looks like the cold boot to Navi path doesn't involve a message that goes through CommonLib.dll...

Just confirming that this also works for me. Appears to have gotten rid of the warning for all means I have found to get it to show up (except cold boot directly to Navigation). I have yet to experience any crashs/reboots, but i'll keep everyone updated!

I'll put this through the paces when I get home and let you know how it works on a 700bt. Thanks a lot once again everyone!

or anybody can compare attachment with original file and try do it.

carver, what program are you using to modify the .dll file? I would like to compare a file to see your changes.

I have an Aussie F900BT (similar to the EW version). Does this file only work with the UC version?

Lacehim

I tried it. So far, it works as FourG has said. I have no probs, all is well, & no nagging nav mess except on cold startup if already on the nav screen. Love it. Thanks Carver, and all the others who are working on these things. Just letting you know it works for me, and I like it!

Thanks again.

Harvey Gordon

Now if we can just figure out that last piece of the puzzle to get rid of it altogether....

Anyone tested this on an european avic f700bt ?

I will try it this weekend.

Anyone tested this on an european avic f700bt ?

I will try it this weekend.

I have a AU model which is very similar to the EW model. Going to try it this weekend too. Let me know how you get on and I will do the same.

Been working great on my (F900BT - US) unit for about 3 days now...

Thx,

Ben

Mine as well! (F90BT-US)

I put this on my Aussie (AU) F900BT and it works fine so the EW should be okay too (both units are very similar). The only time the warning comes up is when the unit is left on map as previously posted. I might be wrong but I also thought that the txt was different to my standard AU message. I'm going to put the old one back and check when I get 5 mins to myself.

I installed this upgrade to my European device and it works as expected! Thanks!

I installed this hack.

However there are TWO times when the Navi Warning comes up:

After a restart when it was left on the Map Screen.

After a restart when it was left on the Main Menu.

but all other combinations work.

EDIT:

This hack no longer works in 3.0.

Carver:

What disassembler did you use to read the DLL? IDA Pro?

This hack no longer works in 3.0.

for 3 version please use 3 version file.

it also posted in first post.

2 pwnin o'brien , yes ida.