I hope is fixable, 2.0 update was dead on, 3.0 - sucks, I feel bad for people driving around in the big busy cities, when 20-50 feet is a matter of couple streets, plus we're not geting much help from street labels either
IDT can you tell we how tu turn off the turn restriction signs but keep the speed limit on?
i'll have t seperated on the next version
do the highyway signs still show up with this data.zip
yes
I too have experienced this over the past couple of days.
The icon which had been there previously was not showing up, instead there would just be the map where it should be. pressing on the area was treated the same as pressing anywhere else on the map.
I am trying to gather a reproducable scenario since this has happened on both of my units.
I can't explain it, or giev the scenario to cause it, however, I can only confirm what finger11 has reported.
I will keep looking at it.
BTW, using a stylus and rebooting the unit fixed it for me on both units.
so it's back.... don't know if it made a difference but i think this was the first time i turned the unit/car on while i was in route to a destination instead of just the car already being on and starting a route. i took the navigation part off and restarted the car/unit and the button is still there. *shrug*
I too have experienced this over the past couple of days.
The icon which had been there previously was not showing up, instead there would just be the map where it should be. pressing on the area was treated the same as pressing anywhere else on the map.
I am trying to gather a reproducable scenario since this has happened on both of my units.
I can't explain it, or giev the scenario to cause it, however, I can only confirm what finger11 has reported.
I will keep looking at it.
BTW, using a stylus and rebooting the unit fixed it for me on both units.
so it's back.... don't know if it made a difference but i think this was the first time i turned the unit/car on while i was in route to a destination instead of just the car already being on and starting a route. i took the navigation part off and restarted the car/unit and the button is still there. *shrug*
so it's still not showing up?
so it's still not showing up?
sorry, 'it's back,' as in it's showing up again.
so it's still not showing up?
sorry, 'it's back,' as in it's showing up again.
when you did my mod did you erase the save folder?
I did not, however, on one of my units it was a brand new (replacement) unit, never used. I unpacked it, upgraded it to 3.0 then added your mod.
so it's still not showing up?
sorry, 'it's back,' as in it's showing up again.
when you did my mod did you erase the save folder?
yea, i deleted everything in there. i basically installed the unit, booted it, restarted and put in 3.0, booted, restarted and put in your mod. followed your steps to put in the mod as well. i'm pretty sure the 3d/2d button was there originally after i put in the mod with my car parked. on my first drive, it wasn't. it wasn't on my 2nd drive this morning to work, appeared during lunch while it was still 'navigating.' and also driving back after lunch with the 'in route' off.
IDT
I have small problem with distance to/time to boxes in navi mode, for some reason every time I`ll hit "go home" those boxes wont show up, then when I`ll go to route info, itenerary or navi staing and then go back to the map they are there, any ideas?
can you show me what codes are for it? (I`m using v1.0)
IDTI have small problem with distance to/time to boxes in navi mode, for some reason every time I`ll hit "go home" those boxes wont show up, then when I`ll go to route info, itenerary or navi staing and then go back to the map they are there, any ideas?
can you show me what codes are for it? (I`m using v1.0)
i'll try to figure it out, AFAIK i already have it fixed on the next update,
IDTI have small problem with distance to/time to boxes in navi mode, for some reason every time I`ll hit "go home" those boxes wont show up, then when I`ll go to route info, itenerary or navi staing and then go back to the map they are there, any ideas?
can you show me what codes are for it? (I`m using v1.0)
i'll try to figure it out, AFAIK i already have it fixed on the next update,
also its coming back after route recalculation
i'll try to figure it out, AFAIK i already have it fixed on the next update,
Have you or anyone come up with where to send the audio produced by the speedcam warnings so that it is heard like other audio output (sends the sound out to the head unit speakers)
edit: for the F500BT
i'll try to figure it out, AFAIK i already have it fixed on the next update,
Have you or anyone come up with where to send the audio produced by the speedcam warnings so that it is heard like other audio output (sends the sound out to the head unit speakers)
edit: for the F500BT
still in the works bro
IDTI have small problem with distance to/time to boxes in navi mode, for some reason every time I`ll hit "go home" those boxes wont show up, then when I`ll go to route info, itenerary or navi staing and then go back to the map they are there, any ideas?
can you show me what codes are for it? (I`m using v1.0)
i'll try to figure it out, AFAIK i already have it fixed on the next update,
also its coming back after route recalculation
just a couple more things to edit and the next update will be done, it will include the fix for that
just a couple more things to edit and the next update will be done, it will include the fix for that
Look forward to seeing it!
Hey IDT,
I was just wondering if you knew how to change the screen off button you have now to make it actually shut the screen off like in the system settings of the unit. I ask because sometimes when I am about to park in a shady area at night, I like to shut off the screen of my unit so no one sees that I have a NAV unit, but with your screen off mod it still shows some backlight, so i'm hoping there is a way to recode this button.
Many thanks if you can help or not.
Hey IDT,
I was just wondering if you knew how to change the screen off button you have now to make it actually shut the screen off like in the system settings of the unit. I ask because sometimes when I am about to park in a shady area at night, I like to shut off the screen of my unit so no one sees that I have a NAV unit, but with your screen off mod it still shows some backlight, so i'm hoping there is a way to recode this button.
Many thanks if you can help or not.
sorry to say but i don't have the knowledge to do that that's why i'm kinda satisfied the the fake screen off button,
Hey IDT,
I was just wondering if you knew how to change the screen off button you have now to make it actually shut the screen off like in the system settings of the unit. I ask because sometimes when I am about to park in a shady area at night, I like to shut off the screen of my unit so no one sees that I have a NAV unit, but with your screen off mod it still shows some backlight, so i'm hoping there is a way to recode this button.
Many thanks if you can help or not.
sorry to say but i don't have the knowledge to do that that's why i'm kinda satisfied the the fake screen off button,
Not a problem IDT. But can please you tell me where I can edit so that I can remove the time when it is off? Whenever you are free, I know you are a very busy person.
Thanks.
Hey IDT,
I was just wondering if you knew how to change the screen off button you have now to make it actually shut the screen off like in the system settings of the unit. I ask because sometimes when I am about to park in a shady area at night, I like to shut off the screen of my unit so no one sees that I have a NAV unit, but with your screen off mod it still shows some backlight, so i'm hoping there is a way to recode this button.
Many thanks if you can help or not.
sorry to say but i don't have the knowledge to do that that's why i'm kinda satisfied the the fake screen off button,
Not a problem IDT. But can please you tell me where I can edit so that I can remove the time when it is off? Whenever you are free, I know you are a very busy person.
Thanks.
look for this layer on your navigatemap_800_480.ui and comment out the time text in there
ui_blankscreen
sorry to say but i don't have the knowledge to do that that's why i'm kinda satisfied the the fake screen off button,
Not a problem IDT. But can please you tell me where I can edit so that I can remove the time when it is off? Whenever you are free, I know you are a very busy person.
Thanks.
look for this layer on your navigatemap_800_480.ui and comment out the time text in there
ui_blankscreen
Thanks again!
multidraw on the way, i was about to release a version today but with the multidraw working i think i'll hold off til i fix the BMP's
WEIRD..............
Hey J, I decided to add a few missed and misplaced speedcams. I added them and today, as I approach a speedcam.... I hear the speedcam voice and warning. It is coming thru the avic only.. no muting of the HU. I am quite happy with that for now though I did have turn the volume to max on the avic.
It seems that manually adding cams somehow causes the cam audio to activate for all cams on my f500bt.
still hoping for speedcam audio thru the HU......any hope for it on the new release
multidraw on the way, i was about to release a version today but with the multidraw working i think i'll hold off til i fix the BMP's
multidraw on the way, i was about to release a version today but with the multidraw working i think i'll hold off til i fix the BMP's
On-screen multiplan in Gurjon skin on AVIC 
multidraw on the way, i was about to release a version today but with the multidraw working i think i'll hold off til i fix the BMP's
Multidraw? Whats that? New goodie?
multidraw on the way, i was about to release a version today but with the multidraw working i think i'll hold off til i fix the BMP's
On-screen multiplan in Gurjon skin on AVIC
is that simulated or have you already got it working?