Does anyone know what the second SD card is for?
2 SD Cards are included ..
1st SD Card : Install this if you NEVER purchased/installed the CNSD-100FM
2nd SD Card : Install this if you HAVE purchased and installed the CDSD-100FM
This is right from the Instruction Manual.
Anyone want to share a copy of the 2nd SD card ? LOL
I'm assuming from that info that SD1 contains a WinCE update and SD2 contains the Flashdrive and Maps 
Steve
Actually, there is a wince upgrade on the second disk as well, along with enough application updates they changed the version number from 3.x to 4.00010.
Actually, there is a wince upgrade on the second disk as well, along with enough application updates they changed the version number from 3.x to 4.00010.
Can we find out what the iGO biuld version is on the latest upgrade?
Actually, there is a wince upgrade on the second disk as well, along with enough application updates they changed the version number from 3.x to 4.00010.
Can we find out what the iGO biuld version is on the latest upgrade?
Boris, I'll be glad to if you'll tell me where to look.
Actually, there is a wince upgrade on the second disk as well, along with enough application updates they changed the version number from 3.x to 4.00010.
Can we find out what the iGO biuld version is on the latest upgrade?
Boris, I'll be glad to if you'll tell me where to look.
It might say so in the "About" screen, where it shows map versions and all. Also, if you can pull the iGO.EXE file to your PC, doing Properties on it should show version as well.
You need to get it from the file itself. go to the file: \apl2\igo\ezrider.exe
Also what is the WinCe version? it is stored in LPUE080PLT.HTM in the root of the flashdrive.
Anyone want to share a copy of the 2nd SD card ? LOL
I second that!
Anyone want to share a copy of the 2nd SD card ? LOL
I second that!
Guess we're not gettting any offers for the 2nd SD card from CNSD-200FM 
guess not 
So does the 200m contain both US and Canadian map coverage?
Anyone else's MSN break with the Map update? Says something about incorrect firmware.
Anyone else's MSN break with the Map update? Says something about incorrect firmware.
Read your instructions again .. in Chapter 4 Page 26 .. it gives you seperate directions for updating the MSN.
Appears the orders are now shipping again from Pioneer!
"The following item(s) you ordered are ready to ship and should leave the warehouse within 12 hours.
MAP update for AVIC-X710, 910BT..SD Card"
If it helps anyone, Crutchfield is selling the CNSD-200FM for $120 with free shipping and in stock. I purchased it last week and it left their warehouse within 24 hours.
If it helps anyone, Crutchfield is selling the CNSD-200FM for $120 with free shipping and in stock. I purchased it last week and it left their warehouse within 24 hours.
Arrghhhhhhhhhhhhhhhhhh! 
I should have checked! 
UPDATE - I figured it out. The 200FM that shipped to me did not include any instructions in it, but I was reviewing the instruction booklet I still had from the 100FM update, and saw that you are supposed to put in the SD card and boot and it will display the Device Number. I'm going to leave this post here in case anyone else doesn't get an instruction book and has the same question.
----Original Question----
I think I'm going crazy.. I just received the CNSD-200FM... I wasn't going to buy it just for the map updates, but some of the comments in this thread convinced me that just maybe, it will fix my problem I've had since the 100FM update, which is the radio booting to the wrong screen 2 out of 3 times. Drives me insane.
Anyway, back to the crazy part... I booted up my F900BT, went to Settings, System Settings, Service Info... the only things listed there are the Map Version and Version, no Device Number. I need the Device Number to do the 200FM update. Am I missing the screen that shows the Device Number? I swear I've hit every button, option, etc.. The Help on the Pioneer activation website is geared towards a different model.
Now, I have my Device Number written down from the 100FM update still, but just wondering if anyone can point out my mistake, or if maybe something has happened to my device?
Thanks
Not sure that I'm correct in your case. But for me I had to boot with the SD Card in and it opened a screen with the device number..... I have the 910.
Once I had that number, I paired it with the Media Number that was on the paper with my SD Cards.. (Used the B card to Update)
Follow the guide in the link on this page http://www.pioneerelectronics.com/PUSA/Products/CarAudioVideo/Accessories/NavigationUpgrades/CNSD-200FM?tab=D
If you have the 100FM update, boot the system with the 'B' card and it should show up. In my case, the license key that was generated by the Pioneer website was the exact same license that it generated for my 100FM update...
Thanks Rebel and Soccer. The update went fine, took about 45 min., no problems. I don't drive this car very often so I couldn't really tell if the response was faster or if it fixed my bootup problem, but it did seem like accessing the SD card for my stored music was a lot faster.. it usually took like 10 seconds when I would switch to SD, it seemed to only take about 2 when I was trying it last night.
Now... I have to go put my favorite three mods back in and remember how to do all that... (route cancel button, mute button, and speed limit sign).
Thanks!
You need to get it from the file itself. go to the file: \apl2\igo\ezrider.exeAlso what is the WinCe version? it is stored in LPUE080PLT.HTM in the root of the flashdrive.
ezrider shows as 8.3.2.139336 and the version shown in LPUE80PLT is 6.2.2.8
You need to get it from the file itself. go to the file: \apl2\igo\ezrider.exeAlso what is the WinCe version? it is stored in LPUE080PLT.HTM in the root of the flashdrive.
ezrider shows as 8.3.2.139336 and the version shown in LPUE80PLT is 6.2.2.8
So, are these newer versions?
Yes
Can anyone confirm if the many nagging bugs in 3.x have been fixed? Like: random boot to black/nav screen, HD tuner preset info, skipping multiple channels, going to map at end of call, 3-d limited zoom and street names, ...
I'm not paying that much for just maps - I wish they'd just release a firmware update to fix the existing bugs!
You need to get it from the file itself. go to the file: \apl2\igo\ezrider.exeAlso what is the WinCe version? it is stored in LPUE080PLT.HTM in the root of the flashdrive.
ezrider shows as 8.3.2.139336 and the version shown in LPUE80PLT is 6.2.2.8
So, are these newer versions?
Great. If someone can post the file, we could see if it can be hacked to allow other maps...